• Rated Lift Capacity (kg): 11,000 lbs (4990)

  • Gross Power (kW): 120 hp (89)

  • Maximum Lift Height (m): 44′ 4″ (13.5)

  • Maximum Forward Reach (m): 30′ 6″ (9.2)

  • Components: Brakes: Oil-Immersed, Disc-type
  • Loader Performance: Maximum Forward Reach at 45° Dump Angle: 14'3"
  • Components: Transmission: 4-Speed Power Shift
  • Hydraulics: Pump Type: Open-Center, Dual-Section
  • General Specifications: Frame Leveling - Left/Right: 10°/10°
  • Loader Performance: Breakout Force: 14,000 lbf
  • General Specifications: Ground Clearance: 16"
  • General Specifications: Fuel Capacity: 30 gal.
  • Loader Performance: Maximum Dump Height: 42'11"
  • General Specifications: Width: 8'3"
  • Engine: Power : 120 hp
  • Capacities: Maximum Lift Height: 44'4"
  • Capacities: Maximum Reach Below Grade: 2'0"
  • Capacities: Capacity at Maximum Lift Height: 8,000 lbs.
  • Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
  • Load Chart: : 4,000 lbs.
  • Load Chart: : 10,000 lbs.
  • Capacities: Lift Capacity: 11,000 lbs.
  • Load Chart: : 3,000 lbs.
  • Loader Performance: Rollback at Ground Level: 30°
  • Hydraulics: Main Relief Pressure : 3,000 psi
  • General Specifications: Wheelbase: 10'8"
  • Engine: Model: 3.8L QSF Tier IV
  • Loader Performance: Dump Angle at Maximum Dump Height: 24°
  • Loader Performance: Maximum Dump Height at 45° Dump Angle: 34'0"
  • Hydraulics: Total Capacity : 43 gpm
  • General Specifications: Turning Radius: 12'2"
  • Components: Parking Brake: Spring-Applied, Hydraulic Release
  • General Specifications: Length - Less Forks: 20'7"
  • General Specifications: Recommended Tire Type: 14.00 x 24 G2 12-ply
  • Loader Performance: Maximum Forward Reach at Maximum Dump Height: 2'3"
  • General Specifications: Overall Height: 7'11"
  • Capacities: Capacity at Maximum Forward Reach: 2,000 lbs.
  • Components: Selective Steering: 4-Wheel 2-Wheel Crab
  • Loader Performance: Total Degrees of Bucket Rotation: 132°
  • Components: Maximum Travel Speed : 22.8 mph
  • Engine: Aspiration: Turbocharged
  • General Specifications: Approximate Weight: 25,400 lbs.
  • Engine: Manufacturer: Cummins
  • Loader Performance: Maximum Loadover Height: 43'11"
  • Capacities: Maximum Forward Reach: 30'6"
  • Hydraulics: Auxiliary Relief Pressure: 2,500 psi
  • Load Chart: : 6,000 lbs.
  • Engine: Rated Speed: 2,500 rpm
  • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
  • Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
  • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
  • Standard centrifugal pre-cleaner and two-stage air cleaner.
  • Hydraulic main control valve in back door.
  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
  • Double universal joints for tight turn radius without applying stress on the axle.
  • 10-degree frame tilt in both directions.
  • Rifled bushings in key areas
  • ROPS and FOPS certified operator's compartment.
  • Transmission and hydraulics easily accessed through large hinged panel.
  • Lockable, two-piece cab door for security, communication and cross-ventilation.
  • Exterior boom hose routings for easy access.
  • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
  • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
  • Standard pneumatic tires.
  • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
  • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
  • Two-wheel, four-wheel, crab steering standard.
  • Easy access to hydraulic oil and transmission reservoirs.
  • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
  • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
  • Industry loading job site maneuverability with a 12' 2" turning radius.