- Components: Parking Brake: Spring-Applied, Hydraulic Release
- Loader Performance: Rollback at Ground Level: 30°
- Capacities: Lift Capacity: 7,000 lbs.
- Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
- Components: Transmission: 4-speed Powershift
- General Specifications: Overall Height: 7'11"
- Load Chart: : 1,500 lbs.
- Loader Performance: Breakout Force: 11,000 lbf
- Hydraulics: Main Relief Pressure : 3000 psi
- Capacities: Capacity at Maximum Lift Height: 6,000 lbs.
- Loader Performance: Maximum Forward Reach at 45° Dump Angle: 14'3"
- Engine: Model: 3.8L QSF Tier IV
- Hydraulics: Total Capacity : 43 gpm
- Engine: Rated Speed: 2500 rpm
- General Specifications: Ground Clearance: 16"
- Load Chart: : 2,000 lbs.
- Load Chart: : 4,000 lbs.
- Loader Performance: Maximum Forward Reach at Maximum Dump Height: 2'3"
- Components: Maximum Travel Speed: 22 mph
- Loader Performance: Dump Angle at Maximum Dump Height: 24°
- Capacities: Maximum Reach Below Grade: 2'0"
- Engine: Manufacturer: Cummins
- Loader Performance: Maximum Dump Height at 45° Dump Angle: 34'0"
- Loader Performance: Total Degrees of Bucket Rotation: 132°
- Load Chart: : 3,000 lbs.
- General Specifications: Recommended Tire Type: 13.00 x 24 G2 12-ply
- Engine: Power : 120 hp
- Components: Brakes: Oil-Immersed, Disc-type
- Capacities: Capacity at Maximum Forward Reach: 1,000 lbs.
- General Specifications: Frame Leveling - Left/Right: 10°/10°
- Loader Performance: Maximum Dump Height: 42'11"
- General Specifications: Length - Less Forks: 20'7"
- Loader Performance: Maximum Loadover Height: 44'2"
- Capacities: Maximum Lift Height: 44'4"
- Hydraulics: Pump Type: Open-Center, Dual-Section
- General Specifications: Fuel Capacity: 30 gal.
- Hydraulics: Auxiliary Relief Pressure: 2500 psi
- Capacities: Maximum Forward Reach: 30'6"
- General Specifications: Wheelbase: 10'8"
- Components: Selective Steering: 4-Wheel 2-Wheel Crab
- General Specifications: Approximate Weight: 23,250 lbs.
- Engine: Aspiration: Turbocharged
- General Specifications: Width: 8'1"
- General Specifications: Turning Radius: 12'2"
- Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
- Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
- Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
- Industry loading jobsite maneuverability with a 12' 2" turning radius.
- Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- Exterior boom hose routings for easy access.
- Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
- Easy access to hydraulic oil and transmission reservoirs.
- Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
- Standard centrifugal pre-cleaner and two-stage air cleaner.
- Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
- Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
- Standard pneumatic tires.
- Transmission and hydraulics easily accessed through large hinged panel.
- Two-wheel, four-wheel, crab steering standard.
- Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
- ROPS and FOPS certified operator's compartment.
- Hydraulic main control valve in back door.
- Double universal joints for tight turn radius without applying stress on the axle.
- Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
- 10-degree frame tilt in both directions.
- Lockable, two-piece cab door for security, communication and cross-ventilation.
- Rifled bushings in key areas