• Rated Lift Capacity (kg): 9,000 lbs. (4083)
  • Gross Power (kW): 120 hp (89)
  • Maximum Lift Height (m): 44′ 4″ (13.5)
  • Maximum Forward Reach (m): 30′ 6″ (9.2)
    • Components: Parking Brake: Spring-Applied, Hydraulic Release
    • Components: Maximum Travel Speed: 22.8 mph
    • Capacities: Maximum Lift Height: 44'4"
    • General Specifications: Ground Clearance: 16"
    • Capacities: Lift Capacity: 9,000 lbs.
    • Capacities: Capacity at Maximum Forward Reach: 1,500 lbs.
    • Loader Performance: Maximum Dump Height at 45° Dump Angle: 34'0"
    • Loader Performance: Maximum Forward Reach at Maximum Dump Height: 2'3"
    • Hydraulics: Pump Type: Open-Center, Dual-Section
    • General Specifications: Approximate Weight: 24,650 lbs.
    • General Specifications: Turning Radius: 12'2"
    • Engine: Manufacturer: Cummins
    • General Specifications: Overall Height: 7'11"
    • Load Chart: : 4,000 lbs.
    • General Specifications: Fuel Capacity: 30 gal.
    • Loader Performance: Maximum Forward Reach at 45° Dump Angle: 14'3"
    • Engine: Model: 3.8L QSF Tier IV
    • Components: Selective Steering: 4-Wheel 2-Wheel Crab
    • Engine: Rated Speed: 2,500 rpm
    • Components: Brakes: Oil-Immersed, Disc-type
    • General Specifications: Recommended Tire Type: 14.00 x 24 G2 12-ply
    • Capacities: Maximum Forward Reach: 30'6"
    • Capacities: Maximum Reach Below Grade: 2'0"
    • Load Chart: : 8,000 lbs.
    • Loader Performance: Maximum Dump Height: 42'11"
    • General Specifications: Wheelbase: 10'8"
    • Hydraulics: Auxiliary Relief Pressure: 2,500 psi
    • Engine: Power : 120 hp
    • General Specifications: Length - Less Forks: 20'7"
    • Loader Performance: Total Degrees of Bucket Rotation: 132°
    • Components: Transmission: 4-speed Powershift
    • Load Chart: : 3,000 lbs.
    • Hydraulics: Main Relief Pressure : 3,000 psi
    • Loader Performance: Dump Angle at Maximum Dump Height: 24°
    • Load Chart: : 2,000 lbs.
    • Loader Performance: Breakout Force: 12,500 lbf
    • Hydraulics: Total Capacity : 43 gpm
    • Capacities: Capacity at Maximum Lift Height: 7,000 lbs.
    • Load Chart: : 6,000 lbs.
    • General Specifications: Width: 8'3"
    • Engine: Aspiration: Turbocharged
    • Loader Performance: Maximum Loadover Height: 44'2"
    • General Specifications: Frame Leveling - Left/Right: 10°/10°
    • Loader Performance: Rollback at Ground Level: 30°
    • Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
    • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
    • Standard pneumatic tires.
    • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
    • Hydraulic main control valve in back door.
    • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
    • Rifled bushings in key areas
    • Exterior boom hose routings for easy access.
    • Industry loading job site maneuverability with a 12' 2" turning radius.
    • Easy access to hydraulic oil and transmission reservoirs.
    • Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
    • 10-degree frame tilt in both directions.
    • ROPS and FOPS certified operator's compartment.
    • Transmission and hydraulics easily accessed through large hinged panel.
    • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
    • Double universal joints for tight turn radius without applying stress on the axle.
    • Lockable, two-piece cab door for security, communication and cross-ventilation.
    • Standard centrifugal pre-cleaner and two-stage air cleaner.
    • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
    • Two-wheel, four-wheel, crab steering standard.
    • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
    • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
    • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
    • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.