• Rated Lift Capacity (kg): 8,000 lbs. (3629)
  • Gross Power (kW): 120 hp (89)
  • Maximum Lift Height (m): 42′ 0″ (12.8)
  • Maximum Forward Reach (m): 28′ 3″ (8.6)
    • Capacities: Lift Capacity: 8,000 lbs.
    • Components: Selective Steering: 4-Wheel 2-Wheel Crab
    • Capacities: Maximum Reach Below Grade: 14"
    • Hydraulics: Pump Type: Gear
    • Hydraulics: System Pressure : 3,000 psi
    • Hydraulics: Total Capacity : 41.5 gpm
    • Components: Axle Manufacturer: Dana
    • General Specifications: Frame Leveling: ±10°
    • Components: Parking Brake: Spring-Applied, Hydraulic Release (SAHR) on Front Axle
    • Load Chart (Outriggers Up/Outriggers Down): : 6,000/8,000 lbs.
    • Capacities: Capacity at Maximum Lift Height: 7,000 lbs.
    • Engine: Aspiration: Turbocharged
    • Capacities: Capacity at Maximum Forward Reach: 1,000 lbs.
    • Load Chart (Outriggers Up/Outriggers Down): : 2,000/4,000 lbs.
    • Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
    • Load Chart (Outriggers Up/Outriggers Down): : 7,000/8,000 lbs.
    • Load Chart (Outriggers Up/Outriggers Down): : 3,000/4,000 lbs.
    • Engine: Power : 120 hp
    • Load Chart (Outriggers Up/Outriggers Down): : 4,000/6,000 lbs.
    • Components: Brakes: 4-Wheel Hydraulically Actuated Internal Wet-Disc Brake
    • Engine: Model: QSF 3.8 Tier IV
    • Components: Transmission: Dana 3-speed Powershift
    • General Specifications: Overall Height: 7'10"
    • General Specifications: Width: 8'0"
    • Load Chart (Outriggers Up/Outriggers Down): : 1,000/3,000 lbs.
    • Components: Maximum Travel Speed: 19.6 mph
    • Engine: Manufacturer: Cummins
    • Load Chart (Outriggers Up/Outriggers Down): : 8,000/8,000 lbs.
    • Capacities: Maximum Lift Height: 42'0"
    • Engine: Rated Speed: 2,500 rpm
    • Capacities: Maximum Forward Reach: 28'3"
    • General Specifications: Ground Clearance: 16"
    • General Specifications: Wheelbase: 10'0"
    • General Specifications: Fuel Capacity: 47 gal.
    • General Specifications: Length - Less Forks: 19'1"
    • General Specifications: Approximate Weight: 23,350 lbs.
    • General Specifications: Turning Radius: 13'8"
    • Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
    • Auto-leveling feature keeps loads level when raising/lowering the boom.
    • Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
    • Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
    • Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
    • Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
    • Dana three-speed power-shift transmission is easy to operate.
    • Proven welded box-section  telescopic boom design maximizes material lift and placement.
    • Internal wet disc brakes provide excellent brakingand long life.
    • Shorter hoses from main valve to boom provide compact hose routing, enhancing serviceability.
    • The lift capacity remains the same as a standard carriage, while the quick attachment point increases versatility and reduces downtime.
    • Side-mounted fuel tank with battery access and an additional storage compartment.
    • Virtually 360-degree visibility increases safety and operating accuracy.
    • Boom tip lift hook option is now available as a factory-installed option or field installed option.
    • This factory-installed option provides a secure lifting point for transporting suspended loads without the use of an additional attachment.
    • Dual-function, pilot-assisted joystick is standard equipment.
    • 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
    • Side and rear glass is standard equipment.
    • Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
    • Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
    • Cylinder design provides one of the fastest cycle times in the industry.
    • in 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites..
    • ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.