Draper Heads

New Holland*: Agriculture

Print Email
Learn more about our Operator Demo!

Learn More
Contact Us Today
  • CLOSE CUTTING: The six-bat reel smoothly feeds crop to the cutterbar, which cuts cleanly using three-inch guards and overserrated knife sections with 10 teeth per inch. A shorter skid shoe design reduces weight and allows the cutterbar to cut more closely to the ground for better cutterbar flexing. The header height control system makes use of either four-sensor or two-sensor combine systems. The hydraulic Syncro-Knife drive system uses a patented single gearbox mounted under the center draper to drive both knife assemblies. This design distributes weight evenly, neutralizes header vibration and leads to an exceptionally smooth cutting action.
  • SMOOTH DRAPER FEEDING: Variable-speed outer draper belts and fixed-speed twin 41.6-inch center draper belts deliver the crop smoothly to the floating 26-inch-diameter auger. The auger features five-inch flighting and handles heavy crop and feeds it smoothly into the combine. A flatter auger floor angle aids crop flow. You can also adjust the auger up, down, fore and aft to match conditions. A new, patented rubber retention system prevents broken auger fingers from entering the combine.
  • EVEN FEEDING: A six-bat New Holland-designed cam reel smoothly feeds crop to the cutterbar and draper belts. The 30- and 35-foot heads feature a single-span, plastic-tine pickup reel while 40- and 45-foot models use a dual-span reel.
  • ULTRA-CLOSE CUTTING AND REDUCED LOSSES: The 880CF SuperFlex™ cutterbar draper head provides closer cutting and better flotation so you can harvest every bit of your valuable crop. These rugged combine heads are available in cutting widths of 30, 35, 40 and 45 feet.
  • CLOSE CUTTING: The 840CD cutterbar handles high-yielding crops cleanly using three-inch guards and over-serrated knife sections with 10 or 14 teeth per inch working at 1260 cuts per minute. The header height control system features four sensors. All header widths (except the 30’ model) come with standard gauge wheels to ensure even stubble height. The hydraulically driven SynchroKnife™ drive system uses a patented single gearbox mounted in the middle of the cutterbar to drive both knife assemblies. This unique and patented design distributes weight evenly, neutralizes header vibration and leads to an exceptionally smooth cutting action.
  • IMPROVED FLOTATION: A patented, rubber spring flotation system is the key to the 880CF head's ground-following ability. You can adjust the rubber torsion springs on each floor support manually to tailor flotation to conditions or to compensate for any cutterbar unevenness. Or, ask your New Holland dealer to install optional hydraulic cutterbar flotation so you can make adjustments right from the combine cab.
  • SMOOTH DRAPER FEEDING: Variable-speed outer draper belts and fixed-speed, twin, 41.6-inch center draper belts deliver the crop smoothly to the floating 26-inch-diameter auger. The auger features five-inch flighting and handles heavy crop, feeding it smoothly into the combine. A flatter auger floor angle aids crop flow. The auger can be adjusted up and down.
  •  : The 840CD rigid draper head delivers outstanding performance in cereals, grains and specialty crops such as rice, so you can harvest every bit of your valuable crop. These rugged headers are available in cutting widths of 30, 35, 40and 45 feet.

Draper and Infeed

  840CD Rigid Draper 880CF SuperFlex Draper
Cross Belt width, in 41.5 41.5
Cross Belt speed, ft/min 0 to 863 rpm 0 to 863 rpm
Center Infeed belt speed, ft/min 769 rpm 769 rpm
Center Infeed belt width, in Two 41.5 = 83 Two 41.5 = 83
Infeed drum or auger diameter, in 26 26
Upper Cross Auger Optional Optional

Weights

  840CD Rigid Draper 880CF SuperFlex Draper
Weight, 25' width, lb 5,230 Width not offered
Weight, 30' width, lb 5,642 6,230
Weight, 35' width, lb 6,142 6,730
Weight, 40' width, lb 7,752 8,340
Weight, 45' width, lb 9,342 9,930

Reel

  840CD Rigid Draper 880CF SuperFlex Draper
Number of bats or tine bars 6 tine bars 6 tine bars
Tine material Plastic std; steel opt. Plastic
Reel Diameter, in 42 42
Reel speed, rpm 0 to 60 0 to 60

Sickle Cutterbar

  840CD Rigid Draper 880CF SuperFlex Draper
Single or double knife Dual opposing knives Dual opposing knives
Knife width 3 3
Knife drive Synchroknife center mounted drive Synchroknife center mounted drive
Knife speed, strokes per minute 2 x 630 = 1260 2 x 630 = 1260

Draper Header

  840CD Rigid Draper 880CF SuperFlex Draper
Cutting width, ft in 30, 35, 40, 45 30, 35, 40, 45
Rigid or Flex Rigid Flex
Vertical Flex Range, in n/a 6
Automatic Header Height Control Standard Optional
Gauge / Stabilizer wheels Standard 35’ and wider Optional 35' and wider
Low Speed Transport Optional, hydraulic deploy Optional, hydraulic deploy

Other Similar Models

Compare Similar Models