Windrower Headers
New Holland*: Agriculture
- AHEAD OF THE REST: Take off hay quickly and easily with the speed and capacity of Durabine™ disc mower-conditioner headers. They provide reliability with reduced power consumption.
- STRONGER FRAME: The 6”x10” angled tube frame and low-profile end struts provide increased frame strength while also providing excellent visibility to the cutterbar so operators have better line of sight to the cutterbar while swathing.
- FLEXIBLE LEAN BAR AND MORE: A flexible lean bar in front assists tall crop flow into the head without sudden impacts that could shatter seedpods. In addition, a second curtain hanging above the cutterbar improves crop flow. In the back, windrow-forming rods gently direct crop into a windrow ready for harvesting.
- HAYBINE® SICKLE HEADS DELIVER PROVEN CUTTING AND CONDITIONING: Since 1964 when New Holland introduced the industry’s first combined mower-conditioner, the Haybine name has been associated with impeccable cutting performance, fast drying, and time-tested reliability. New Holland continues this legacy with HS Series sickle heads available in 14-, 16-, and 18-foot high-capacity models for Speedrower® Series self-propelled windrowers.
- VERSATILE, MODULAR CONDITIONING SYSTEM: Non-conditioned hay? No problem. Just remove the conditioning module and outfit the header with a closure kit, or exchange one system for another system for the flexibility to condition different crop types. Removing or exchanging the conditioning module takes just minutes so you can easily achieve ideal conditioning. Available Options: • Rubber chevron-design intermeshing rolls • Steel Chevron Rolls • High-Contact Urethane Rolls • LeaningEdge™ Flail Tine Conditioning The proven New Holland torsion-bar roll-pressure system applies near-constant pressure for consistent conditioning, no matter how thick the crop, without plugging.
- HYDRAULIC HEAD TILT: To make a cut-height adjustment, simply use the tilt switch on the CommandGrip™ multi-function handle. With a glance through the front windshield, you can quickly observe the head tilt angle indicator located on the header tilt cylinder on the Speedrower windrower. This quick check allows you to choose the best cutting angle for every field situation.
- 40-FOOT WIDTH: Choose the 40-foot DuraSwath™ 440HB head for the highest cutting capacity. This head is compatible with the six-cylinder Speedrower windrowers. The DuraSwath 440HB head cuts large acreages down to size and features a double knife drive, split reel and double reel drive and a center-delivery swath opening. A four-wheel transport integral option is available; all hitch components store right on the head, making it easy to go from field to transport.
- GRASS SEED HARVESTING CONFIGURATION: The Durabine™ 416 Specialty Grass Seed Harvesting Configuration delivers high-capacity harvesting performance in delicate crops that do not require conditioning, including grass seed, mint, and flower seed. The unique auger features flighting that tapers as it approaches the center of the head, with no auger paddles or paddle supports and no conditioning module.
- THE BENEFIT OF LARGER DISCS AND KNIFE OPTIONS: Durabine heads provide a close, clean cut with less horsepower, which improves mowing efficiency and reduces fuel consumption. The large-diameter cutting discs operate at a shallower angle that easily slices through down crop and reduces the risk of scalloping. The MowMax II cutterbar delivers a close cut—as short as 0.79 inch—as well as a wider range of cutting heights—up to 3.5 inches with standard skid shoes. Reversible, swing-away, 18-degree twist knives are standard. A broad, offering of knives includes standard 14-degree twist knives, 7-degree twist knives, special-design rock knives, and 14-degree twist, serrated knives. For extended knife wear in difficult conditions, the rock knife offers greater resistance bending, and are ideal when operating in extremely stony conditions. Special serrated knives are ideally suited for sandy soils or abrasive operating conditions, providing long life in these harsh working environments. All New Holland knives for Durabine™ disc heads are reversible for double the cutting life and work with the QuickMax system.
- GAUGE WHEEL OPTION: Fully castering gauge wheels with coil spring-over-shock absorbers provide three to eight inches of shock travel for superior ground following and flotation. A simple adjustment linkage provides a mechanical advantage reducing the effort needed for an easy one-person adjustment. The additional pair of transport wheels from the four-wheel transporter (available with a 40’ header) can be placed directly next to the castering gauge wheels for tandem gauge wheel support on these large headers.
- HIGH-CAPACITY CUTTING PERFORMANCE: Dual counter-stroking sickles feature a timed modular wobble drive that assures smooth cutting with minimal vibration and maintenance. Serrated knives slice quickly at over 1800 spm and the three-inch stroke delivers unrivaled cutting. Bolt-on knife sections provide long cutting life and easy replacement, and adjustable knife hold-down clips make maintenance a breeze.
- SMOOTH AND EVEN CROP FLOW: Durabine disc heads feature the exclusive, full-length crop-flow auger that quickly moves crop away from the cutterbar for cleaner cutting, increased capacity, optimum feeding, more uniform conditioning quality, and an evenly distributed windrow. The heavy-duty, 20-inch auger features thick 5/16-inch flighting with reinforcement gussets on the backside to handle the heaviest crops with ease.
- IMPROVED REEL AND REEL DRIVE: The chain-driven reel provides faster reel speeds, increased reel speed range, and more power. This system also eliminates any overhang of the reel drive motor past the crop deflector to reduce crop run-down. The reel drive coupler now features a heavy spiral spring pin to provide increased shear protection, as well as a collar that positively retains the pin. Support collars on both sides of the outer reel bat spiders on each end of the header provide a robust connection of the bat support arms to the center tube on all UII reels. • The collars bolt directly to the tube and to the bat support arms • The collars surround the tube and are tightly clamped to the tube • The cam-timing arm’s connection to the reel bats incorporates cast knuckles that fully wrap around the bats to greatly improve durability. All of these improvements are designed to provide trouble-free performance for the life of the header.
- IMPROVED FINGER TINES: HCC reel features new, heavy-duty long plastic tines that enhance pickup of downed crop while increasing tine durability.
- REEL ANGLE: The reel arms on each side of the header operate the reel at a steeper attack angle to reach crop in front of the knives for improved crop feeding, especially in lodged and down crops. You can adjust the reel attack angle as needed on the fly while swathing. All DuraSwath heads come with hydraulic reel fore/aft and vertical adjustment.
- FLATTER TABLE AND BELT ANGLE: A flatter draper belt angle provides better feeding and improved visibility. There is ample crop capacity on the tables without the need for a cross auger in all but the heaviest crops. Cross augers are available for the 30, 36, and 40-foot models. The center deck opening adjusts from 56 to 72 inches, with an 80-inch opening possible when back panel extensions are removed. The continuous draper seal and segmented slide blocks keep deck slides free from material build-up.
- MOWMAX™ II DISC CUTTERBAR: The MowMax II cutterbar provides the cleanest cut and rugged reliability, resulting in ultra-smooth crop flow. Durabine durability results from heavy cast rock guards and the self-contained disc modules. Gear cases are driven by pilot-supported hardened alloy drive shafts with lubricated drive splines for added durability. The large-diameter discs feature maximum strength and reliability with a rugged pinion gear drive. Upgraded full-coverage replaceable skid shoes provide added protection and allow the Durabine header to glide over a variety of terrain, including soft ground and new seedings where stubble damage is a concern. Choose the 10-disc Durabine 416 for a 16-foot, 1-inch cut or the 12-disc Durabine 419 for a huge, 19-foot, 4-inch cut. Both use pairs of counter-rotating discs for cleaner cutting and ultra-smooth crop flow.
- POWER REVERSER: Crop slugs can be expelled without leaving the cab. At the touch of a button, the conditioning rolls, auger, and discs reverse to remove plugs in seconds.
- CROP DIVIDERS AND ROTARY SHEAR READY OPTION: Improved, narrower crop dividers reduce crop rundown and feature tool-free attachment and removal so you can remove them quickly for transport. The standard pipe dividers are best suited for taller crops while the optional floating tip dividers help with on-the-ground cutting. The rotary shear-ready option configures the DuraSwath to be ready for easy installation of cutting shears mounted on the crop dividers. The shears run directly off the knife circuit and help the head cut through downed, tangled, and difficult green crops.
- FAST AND SIMPLE IN-FIELD SERVICABILITY: MowMax™ II cutterbars feature a true modular design for smooth, quiet, trouble-free mowing as well as fast and inexpensive servicing. Driven through individually sealed gearboxes with dedicated oil reservoirs, modules are never at risk for oil starvation while cutting on slopes. In the event that your mower hits an obstruction, the exclusive New Holland ShockPRO™ hubs absorb harmful impacts, protecting the internal cutterbar drive from damage. Even better, they’re quick to replace in the field so you can keep cutting when the weather is right. Replacement takes less than 10 minutes, at a minimal cost and without compromising the sealed module. Accidents happen, and in the event of a significant collision, the true modular MowMax concept design fully contains damage to the affected module to minimize damage to the rest of the cutterbar.
- CONSISTENT CROP FEEDING: The fully adjustable five-bat reel sweeps crop smoothly into the exclusive floating auger. This 20-inch auger with 5-inch flighting floats up to two inches to handle heavy crops and delivers crop evenly to the conditioning rolls.
- MORE ROBUST CUTTERBAR AND KNIFE DRIVES: An upgraded, low-profile cutterbar allows on-the-ground cutting—from 3/4 to 1-5/8 inches—while still maintaining a guard angle of two to eight degrees. The robust New Holland cutterbar system works well in all crops, and especially well in muddy, down and green crops. The Schumacher cutterbar system provides excellent cutting in all crops. The knife drive motor is both efficient and reliable to handle the torque resulting from tough conditions. Double heat-treated knife hold-downs have been improved to offer increased durability and easier service adjustment. Long-life, six-inch-wide, poly skid shoes reduce wear on header components in on-ground cutting applications. This design provides more reliable retention to the header, and less expensive repairs since you can replace six-inch sections rather than sections that are several feet long.
- DRAPER BELTS PULLED, NOT PUSHED: Thick, durable, center-driven Raptor™ draper belts are pulled—not pushed—for improved feeding efficiency. Wider support ribs under the draper belts ensure the belts do not sag under heavy crop loads. This improvement combined with a continuous barrier seal at the front lip of the belts, and mating draper belt guards ensure crop easily transitions from the cutterbar to the draper belts without entering the belt roller area.
- QUICKMAX™ KNIFE SYSTEM IS STANDARD EQUIPMENT: Do not put off changing dull or broken knives anymore; the MowMax II disc cutterbar is now equipped with the QuickMax™ system as standard equipment so you can replace worn or damaged knives in a flash so you’re back cutting clean again in just seconds. The unique QuickMax system allows for fast knife changes with a 180-degree rotation of the discs so you are back mowing quickly. The patented New Holland eccentric knife nut utilizes centrifugal force to provide exceptional blade security. Best of all the QuickMax knife system works with all Durabine™ disc header knives so there are no special knives to buy. See your local authorized New Holland dealer about the QuickMax system and ask about special upgrade kit available for prior model Durabine™ disc headers.
- QUICK AND EASY ADJUSTMENTS: Crop widths can range as wide as a 96-inch swath or as narrow as a 38-inch windrow—or any width in between. No tools are required to make width adjustments, and with the optional electric windrow shield adjustment feature, changes can be made without leaving the cab. New Holland makes adjusting roll pressure easy, too. A simple hand crank adjusts conditioning aggressiveness. Likewise, roll gap adjustment is simple and precise. One easy adjustment at each end of the upper roll completes the job in no time!
- 3-YEAR MOWMAX™II DISC CUTTERBAR WARRANTY: New Holland backs the MowMax™II disc cutterbar with three full years of factory warranty. That’s three full years includes the base one-year base machine warranty plus two additional years on the cutterbar assembly excluding common wearing parts. See your authorized New Holland dealer for complete program details.
- HIGH-CAPACITY DURASWATH™ DRAPER HEADS: For high-capacity swathing of small grains, canola, forage and specialty crops, choose DuraSwath™ draper heads from New Holland. Available in 25, 30, 36 and 40-foot widths, DuraSwath headers cut big acreage down to size.
- PROVEN CONDITIONING: New Holland chevron-design intermeshing rubber rolls are known for their thorough conditioning and fast crop dry down. The proven torsion-bar roll-pressure system applies near-constant pressure through the wide 102-inch rolls and allows the rolls to open automatically when needed to clear slugs of material without stopping. No tools are needed to adjust conditioning roll pressure. High-contact chevron rolls and steel chevron intermeshing rolls are also available.
- ENHANCED HEAD DRIVE SYSTEM: A larger head motor and drive system enhancements allow for an increase in horsepower to the cutterbar of up to 15%.
Reel
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Reel Choices (SF = steel fingers, PF = plastic fingers) | - | - | - | UII, 6-bat, w/SF or PF; HCC, 6-bat, flipover, w/PF | UII, 6-bat, w/SF or PF; HCC, 6-bat, flipover, w/PF | UII, 6-bat, single, w/PF; UII, 6-bat, split, w/PF; HCC, 6-bat, flipover, w/PF | UII, 6-bat, split, w/PF; HCC, 6-bat, flipover, w/PF | 5-bat | 5-bat | 5-bat |
| Speed range rpm | - | - | - | 10 – 75 | 10 – 75 | 10 – 75 | 10 – 75 | 52-83 mechanical, 0-76 optional hydraulic drive | 52-83 mechanical, 0-76 optional hydraulic drive | 52-83 mechanical, 0-76 optional hydraulic drive |
| Drive | - | - | - | Single reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; | Single reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; | Single reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; Split reels equipped with two, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motors | Single reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; Split reels equipped with two, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motors | Belt & chain | Belt & chain | Belt & chain |
Conditioner (Flails)
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Length in. (m) | 90 (2.3) | - | - | - | - | - | - | - | - | - |
| Speed rpm | 1310 | - | - | - | - | - | - | - | - | - |
| Hood position | Adjusted with a single crank | - | - | - | - | - | - | - | - | - |
Auger
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Type | Floating | Floating | Floating | - | - | - | - | Floating | Floating | Floating |
| Maximum diameter in. (mm) | 20 (508) | 20 (508) | 20 (508) | - | - | - | - | 20 (508) | 20 (508) | 20 (508) |
| Flighting depth in. (mm) | 7 (178) | 7 (178) | 7 (178) | - | - | - | - | 5 (127) | 5 (127) | 5 (127) |
Cutterbar
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Cutterbar type | 10-disc modular disc cutterbar, 2500-rpm max disc speed | 12-disc modular disc cutterbar, 2500-rpm max disc speed | 10-disc modular disc cutterbar, 2500-rpm max disc speed | SCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut) | SCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut) | SCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut) | SCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut) | Timed, dual, counterstroking sickles, Open, dual, wobble drive | Timed, dual, counterstroking sickles, Open, dual, wobble drive | Timed, dual, counterstroking sickles, Open, dual, wobble drive |
| Knives | 20 reversible, swing-away knives (2 per disc) | 24 reversible, swing-away knives (2 per disc) | 20 reversible, swing-away knives (2 per disc) | - | - | - | - | Over serrated, bolted knives with 2-tine, double-hardened guards | Over serrated, bolted knives with 2-tine, double-hardened guards | Over serrated, bolted knives with 2-tine, double-hardened guards |
| Knife speed | 181-mph(291-kph) knife tip speed | 181-mph(291-kph) knife tip speed | 181-mph(291-kph) knife tip speed | 1400 SPM | 1400 SPM | 1400 SPM | 1400 SPM | 1810 spm | 1810 spm | 1810 spm |
| Sickle stroke in. (mm) | - | - | - | 3.35 (85) | 3.35 (85) | 3.35 (85) | 3.35 (85) | 3 (76) | 3 (76) | 3 (76) |
| Flotation | Hydraulic adjustment from windrower cab | Hydraulic adjustment from windrower cab | Hydraulic adjustment from windrower cab | - | - | - | - | - | - | - |
| Cutting angle and height, degrees, in (m) | Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89) with standard skid shoes* | Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89) with standard skid shoes* | Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89 with standard skid shoes* | 0.75 (19) @ 8 degrees tilt | 0.75 (19) @ 8 degrees tilt | Minimum 0.75 in (19 mm) @ 8 degrees tilt | Minimum 0.75 (19) @ 8 degrees tilt | Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5 ) | Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5 ) | Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5) |
| Header ground clearance - bottom of skid shoes in. (mm) | 27 (686)* | 29.6 (754)** | 27 (686)* | 47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended | 47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended | 47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended | 47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended | - | - | - |
Raptor Draper Belts
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Belt width and construction | - | - | - | 42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection | 42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection | 42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection | 42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection | - | - | - |
| Belt/roller guide design | - | - | - | V-guide on upper end of inner side of belt with V-groove in rollers | V-guide on upper end of inner side of belt with V-groove in rollers | V-guide on upper end of inner side of belt with V-groove in rollers | V-guide on upper end of inner side of belt with V-groove in rollers | - | - | - |
| Roller design | - | - | - | Rubber vulcanized steel drive roller, steel idler roller | Rubber vulcanized steel drive roller, steel idler roller | Rubber vulcanized steel drive roller, steel idler roller | Rubber vulcanized steel drive roller, steel idler roller | - | - | - |
| Speed range ft. (m) | - | - | - | 0 - 760 (0-232)/minute | 0 - 760 (0-232)/minute | 0 - 760 (0-232)/minute | 0 - 760 (0-232)/minute | - | - | - |
| Cleat design and height in. (mm) | - | - | - | 1/2" (13) high cleat, w/embedded fiberglass reinforcement | 1/2" (13) high cleat, w/embedded fiberglass reinforcement | 1/2" (13) high cleat, w/embedded fiberglass reinforcement | 1/2" (13) high cleat, w/embedded fiberglass reinforcement | - | - | - |
| Chaff barrier seal design | - | - | - | Continuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard | Continuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard | Continuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard | Continuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard | - | - | - |
| Belt angle degrees (@minimum cutterbar tilt) | - | - | - | 15 @ 2 degrees tilt | 15 @ 2 degrees tilt | 15 @ 2 degrees tilt | 15 @ 2 degrees tilt | - | - | - |
Header drive
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Cutting width ft. in. (m) | 16’ 1” (4.9) | 19’ 4” (5.9) | 16’ 1” (4.9) | 25 (7.6) | 30 (9.1) | 36 (11) | 40 (12.2) | 14’ 3” (4.34) | 16’ 3” (4.95) | 18’ 3” (5.56) |
| Overall width ft. in. (m) | 16' 4" (4956) | 19' 5" (5912) | 16' 4" (4956) | - | - | - | - | 16' 3" (4.95) | 18' 3" (5.56) | 20' 3" (6.17) |
| Approximate weight lbs. (kg) | 4700 (2132) | 5340 (2422) | 4700 (2132) | 4675 (2121) includes reel | 5631 (2554) includes reel | 6702 (3040) includes reel | 7300 (3311) includes reel | 3900 (1770) | 4120 (1869) | 4370 (1983) |
| Versions available: Single-knife drive, single swath, single reel | - | - | - | x | x | - | - | - | - | - |
| Versions available: Single-knife drive, double swath, single reel | - | - | - | x | x | - | - | - | - | - |
| Versions available: Double-knife drive, single swath, single reel | - | - | - | x | x | x | - | - | - | - |
| Versions available: Double-knife drive, single swath, split reel | - | - | - | - | - | x | x | - | - | - |
| Versions available: Double-knife drive, double swath, single reel | - | - | - | x | x | x | - | - | - | - |
| Versions available: Double-knife drive, double swath, split reel | - | - | - | - | - | x | - | - | - | - |
| Windrow/swath width in. (mm) | 38 to 96 (965 to 2438) | 38 to 96 (965 to 2438) | - | 56 - 72 (1420 - 1830) center delivery windrow width 54 - 65 (1370 - 1650) double swath end windrow width |
56 - 72 (1420 - 1830) center delivery windrow width 54 - 65 (1370 - 1650) double swath end windrow width |
56 - 72 (1420 - 1830) center delivery windrow width 54 - 65 (1370 - 1650) double swath end windrow width |
56 - 72 (1420 - 1830) center delivery windrow width | 38-96 (910-2438) | 38-96 (910-2438) | 38-96 (910-2438) |
Conditioner (Rolls)
| Durabine™ 416 | Durabine™ 419 | Durabine™ 416 Specialty Grass Crop | DuraSwath™ 425 HB | DuraSwath™ 430 HB | DuraSwath™ 436 HB | DuraSwath™ 440 HB | Haybine® 14HS | Haybine® 16HS | Haybine® 18HS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Type | Chevron-design, intermeshing molded rubber, steel or high-contact rolls | Chevron-design, intermeshing molded rubber, steel or high-contact rolls | - | - | - | - | - | Chevron-design, intermeshing molded rubber, steel or high-contact rolls | Chevron-design, intermeshing molded rubber, steel or high-contact rolls | Chevron-design, intermeshing molded rubber, steel or high-contact rolls |
| Length in. (m) | 102 (2.6) | 102 (2.6) | - | - | - | - | - | 102 (2.6) | 102 (2.6) | 102 (2.6) |
| Roll speed rpm | 938 | 938 | - | - | - | - | - | 717 | 717 | 717 |
| Roll pressure | Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass | Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass | - | - | - | - | - | Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass | Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass | Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass |
| Roll gap | Adjustable stop bolt | Adjustable stop bolt | - | - | - | - | - | Adjustable stop bolt | Adjustable stop bolt | Adjustable stop bolt |
