Asphalt Paver 6150
Leeboy: Asphalt / Concrete Paving
- Paving Widths Variable Up To 15’ (4.57 m)
- Weight (with screed): 18,180 lbs. (8,246 kg)
- Tier 4 Final – 74hp (55kW) @ 2,200 RPM
Operator’s Platform:
Full machine width platform with dual seats
Training, Support and Company:
Training and support manuals
Optional on-site operator training by Dealer
One-year, unlimited hours warranty against any manufacturer defects
Extended warranty available
50+ years manufacturing experience
ISO 9001 Certified
Manufactured in the USA
Screed Extensions:
Two 44” (1.18 m) screed extensions hydraulically actuated to a width of 15’ (4.57 m)
The heated extensions are mounted flush with the main screed and are adjustable with the angle of attack
Includes replacement .25” (6.35 mm) AR 400 bottom wear plates
Capacities:
Fuel: 36 gallons (140 l)
Hydraulic: 36 gallons (140 l)
Engine:
Kubota turbocharged diesel
Tier 4 Final – 74hp (55 kw) @ 2,200 RPM
Paving Widths:
Machine has variable paving widths up to 15’ (4.6 m)
Push Rollers:
Two 3" (0.076 m) diameter rollers with sealed bearings mounted on a swivel frame
Vertically adjustable push rollers, 7” (.178 m) of height adjustment
Washdown System:
Electric HD pump with two 25’ x .375” (7.62 x .009 m) diameter hose reels and spray nozzles
Washdown Tank: 7 gallons (26.4 l)
Operator’s Controls:
High deck/low deck configuration
Dash panel is movable from left to right and contains all machine controls
Pivot steer and posi-trac
Equipped with auger and conveyor bypass
E-stop
Screed Heat (Propane):
Two 54,000 BTU propane burners on main screed
Each extension has one 36,000 BTU propane burner
One 36,000 BTU burner ignitor
Hopper:
Conveyor fed
Side wings hydraulically fold in or out
Hopper size: 7 ton (6,350 kg)
Hopper height: 22” (.559 m)
Screed:
Legend propane screed
8’ (2.43 m) main screed
Constructed of .375” (9.5 mm) AR 400 bolt-on wear plates for easy replacement
Screed Crown/Invert:
Equipped with a crown/invert adjustment allowing at least 2” (76.2 mm) of crown and .75” (19.05 mm) of valley
Includes a leveling indicator for the operator to know when the screed is level
Dimensions:
Length: 16’ 6” (5.03 m)
Width: 8’ 6” (2.59 m) transport
10’ 7” (3.21 m) hopper wings down
Height: 7’ 8” (2.34 m)
Total Weight (with LP screed): 17,550 lbs. (7,960 kg)
Hydraulic System:
Variable volume hydraulic pumps for each drive
Fixed volume gear pump for augers and general functions
Fixed volume gear pump for conveyors
Fixed volume gear pump for generator and steering
Hydraulic reservoir: 36 gallons (140 l)
Optional Equipment:
Electric Legend Plus Screed, variable up to 15’ (4.572 m), 10 kw generator
Legend 815 Heavy-Duty Electric Screed, variable up to 15’ (4.572 m), 10kw generator
Automatic screed temperature controls
Screed extension vibration
Sloping screed extensions
Power crown
Heated endgates, only available on the Legend 815 Heavy-Duty Electric Screeds
12" (0.304 m) x 4.5” (.114 m) berm extensions, right and left
Walkboard extensions slide outs, right and left
Single point lube kit, conveyors
Single point lube kit, augers
Wiring only, grade controls (TopCon), includes A/M modules
3:1 flight screw adjusters
Sonic grade control, one side (TopCon)
Dual grade control (TopCon P-32 system)
Dual grade and slope (TopCon P-32 system)
Umbrella
Additional Standard Equipment:
Back-up alarm
Lockable fuel and hydraulic caps
Rotating LED safety beacon
LED work lights
Electronic gauge package (oil pressure, hour meter, fuel gauge, volt meter, water temp, tachometer, hydraulic oil temp, hydraulic level warning, engine diagnostics)
Screed Vibration:
Equipped with two hydraulic vibrators capable of producing 2,000 vibrations per minute
Steering:
Dual electronic steering wheels with joystick for forward, reverse operation
Allows driver control from right or left side of paver
Screed End Gates:
Equipped with vertical height adjustment and tilt
Material Augers:
Two 12” (.305 m) replaceable segmented augers constructed of casted .625” (.016 m) thick Ni-hard steel
Augers can be controlled automatically by sonic sensors (non-contacting)
Wheeled Drive System:
Hydrostatic drive with 2-speed hydrostatic motors
Rear: 385/65 R22.5 heavy-duty hydroinflated truck tires
Front: steerable wheels, 12” x 22” (.304 x .558 m) diameter solid rubber tires
Paving speed: 0 to 228’ per minute (2.6 mph)
Travel speed: 0 to 660’ per minute (7.5 mph)
Paving Depths:
Depth: 0” to 6” (.152 m)
Under Auger Material Cutoff:
Two independent hydraulically operated 4' (0.051 m) wide gates located under the augers and constructed of at least .375" (.009 m) A-36 plate steel
Download Line Card
More information available
