


The multi-function drive unit equipped with the S30 quick attach bracket is intended mainly for rotating different types of brushes – XL weed brush, XL wire rope brush, and carousel broom. It can be mounted in a horizontal or vertical position on the side arms with S30 quick-attach system (both mechanical and hydraulic arm), but not on the attachment coupling plate of the loader. The S30 drive unit has the same 2 1/4 square shaft for attachments as the A37190 Multi-function drive unit but is equipped with lower torque and higher speed hydraulic motor and, therefore, works better with brushes. On the other hand, it doesn’t have enough power to rotate auger drills or screw cone log splitter.
- Drive unit which mounts on S30 side arms
- Possible to mount in a horizontal or vertical position
- Equipped with high-speed hydraulic motor, intended for rotating different types of brushes
- Same 2 1/4 square shaft for attachments as on the A37190 Multi-function drive unit

TECHNICAL INFORMATION
Torque | 950 Nm @ 200 bar |
Rotating speed | 95 rpm @ 7.9 gal/min |
Weight | 66.1 lb |
Product no. | A4229926 |
WORKS WITH
A37317 CAROUSEL BROOM
- Same Ø 39.4 in the replaceable brush as on A2971 Carousel broom
- Weight 150 lb
A433646 CAROUSEL BROOM, STEEL
- Ø 39.4 mm brush with steel bristles
- Weight 150 lb
A429932 XL WEED BRUSH

- Efficient weed remover can be mounted both on the normal and on the S30 drive unit
- Consists of 3 pcs Ø 23.6" steel brushes mounted together
- Max. diameter 48.4"
- Height 14.8"
- Weight 140 lb
A431157 XL WIRE ROPE BRUSH

- Brush with 32 pcs heavy duty wire rope bundles, can be mounted both on the normal and on the S30 drive unit
- Max. diameter 40"
- Height 14.6"
- Weight 80 lb