Specifications
| Electronic System: Articulation Angle from Center: | 45° |
| Electronic System: Attachment Pivot Clearance: | 7.5" |
| Electronic System: Bucket Hinge Pin Height: | 136.8" |
| Electronic System: Bucket Width - Standard: | 84" |
| Electronic System: Dump Clearance at Full Height: | 106.7" |
| Electronic System: Dump Reach at Full Height: | 22.4" |
| Electronic System: Folded ROPS Height: | N/A |
| Electronic System: Front Wheel Center to Pivot Pin: | 36.7" |
| Electronic System: Ground Clearance: | 12.3" |
| Electronic System: Ground Plane to Bucket Edge Height: | 129" |
| Electronic System: Height to Top of Cab: | 97.5" |
| Electronic System: Hood Height: | 69.9" |
| Electronic System: Inner Turning Radius: | 63.8" |
| Electronic System: Length with Bucket on Ground: | 205.5" |
| Electronic System: Maximum Reach Height: | 163.8" |
| Electronic System: Outer Turning Radius: | 134.2" |
| Electronic System: Rear Overhang: | 52.1" |
| Electronic System: ROPS Width: | 57.1" |
| Electronic System: Shipping Length: | 174.9" |
| Electronic System: Turning Radius with Bucket: | 155.3" |
| Electronic System: Wheel Radius: | 19.5" |
| Electronic System: Wheelbase: | 81.2" |
| Electronic System: Width Over Tires: | 68.4" / 77.1" |
| Electronic System: Battery: | 12-volts |
| Electronic System: Bucket Breakout: | 13,020 lbf |
| Electronic System: Displacement : | 0.95 gal |
| Electronic System: Drive Hydraulic Reservoir Capacity : | 19.5 gal. |
| Electronic System: Drive Hydraulic System Pressure : | 5,511 psi |
| Electronic System: Fuel Tank Capacity: | 27 gal. |
| Electronic System: High-Flow Auxiliary Hydraulics - optional: | 30.6 gpm |
| Electronic System: Make: | Deutz |
| Electronic System: Maximum Travel Speed: | 5/12/19 mph |
| Electronic System: Model/Number of Cylinders: | TD 3.6 L4 / 4 |
| Electronic System: Operating Weight: | 10,540 lbs. |
| Electronic System: Power @ 2800 rpm: | 74.3 hp |
| Electronic System: Tire Gauge: | 52.4" / 60.8" |
| Electronic System: Tire Size - Standard: | 405 / 70-20 |
| Electronic System: Work Hydraulic System Flow : | 18.5 gpm |
| Electronic System: Work Hydraulic System Pressure: | 2,900 psi |
- Linkage design allows for mechanical self-leveling action in both up and down directions.
- Lift arm and bucket float features allow for “floating” of the lift arm for light scraping or rear-ward leveling actions. Bucket float is a special feature that adds control and more operator flexibility for operating certain attachments with only bucket float.
- Excellent 360-degree visibility is achieved by positioning the operator above instead of behind the load for safe operation and excellent view of the attachment.
- Spacious surface window area offers excellent all-around visibility.
- Two auxiliary hydraulic lines with flat-faced couplers power a variety of tools and make attachment changes easy.
- Excellent bucket dump angles at the mid- and top-ranges of the lift path as well as outstanding forward reach at mid-range.
- The tail follows where the front leads, providing excellent maneuverability. The bucket and tires follow a constant turn radius, so the rear of the loader follows the path of the front tires.
- LCD display has menu screens with light indicators for electrical diagnostic checking.
- A complete cab enclosure option provides enhanced comfort and safety for all-day-long operation..
- High ground clearance allows the loaders to pass over objects in the work-path with ease.
- Powerful, quiet and efficient Deutz diesel engines with excellent performance for all applications.
- Differential lock button on joystick increases traction for 100% effective engagement of axles.
- 2-speed hydrostatic drive can be activated “on the go” by a switch on the joystick.
- Perform daily service checks with ease through the rear engine cover, which provides access to the engine, hydraulic reservoir filler and filter, radiator, and more.
- Engine speed can be conveniently controlled two ways: (1) with the right foot throttle or (2) with the convenient hand throttle, which also allows the ground speed to be controlled independently of engine speed.
- Cab doors have an extended-latch design, which allows latching in a slightly-open position for limited ventilation, per operator preference.
- Linkage becomes recessed in the lift arm at full lift heights for protection when dumping into trucks/trailers and provides excellent forward visibility.
- Generous sound absorbing material between the cab and engine compartment is standard with cab enclosure and suppresses sound levels.
- Standard equipment includes heating system, four working lights, wipers on front and rear windows, a cup holder and adjustable side mirrors.
- Inching pedal allows operators to vary the ground speed while maintaining a fixed engine speed, to optimally run attachments while enabling precise control.
- Narrow machine width allows access to tight, confined spaces that most skid loaders with comparable operating capacities cannot access.
- Nitro-steel rods on the hydraulic cylinders resist abrasion, pitting, scratching and corrosion.
- Multi-function joystick lever controls the lift arm, bucket, float, travel direction, differential lock and auxiliary hydraulic functions
- Chassis oscillates 10 degrees each way, for 20 degrees of total oscillation, to maintain traction by keeping the wheels on the ground on uneven terrain.
- All models feature comfortable and easy-to-access grab handles to assist entry and exit.
- The deluxe suspension seat is spring-suspended with a high amount of travel providing a comfortable ride for the operator.
- A heavy-duty articulating joint offers 45-degree turning angles each way and provides optimal maneuverability with a tight turning radius. Articulated steering has minimal affect on turf and ground surfaces and extends the life of the tires.
- Excellent reputation for reliable cold-starting and smooth operation.
- Hydraulic components are provided with diagnostic test ports for easy access when required.
- Tiltable steering column with center-mount instrumentation for easy operator reference.
- Hydraulic hoses are nestled within the lift arms, keeping them out of the loader linkage “damage zone” during lifting and dumping operations.
