Specifications
| Capacities/Weights: Fuel Tank: | 16.5 gal. |
| Capacities/Weights: Operating Weight - Approximate: | 5,130 lbs. |
| Capacities/Weights: Rated Operating Capacity: | 1,350 lbs. |
| Capacities/Weights: Rated Operating Capacity with Optional Counterweight: | 1,500 lbs. |
| Capacities/Weights: Travel Speed - Maximum: | 8.0 mph |
| Dimensions: Bucket Width: | 54" |
| Dimensions: Clearance Circle – Front w/ Bucket: | 72.5" |
| Dimensions: Clearance Circle – Front w/o Bucket: | 44.1" |
| Dimensions: Departure Angle: | 25° |
| Dimensions: Dump Angle at Full Height: | 40° |
| Dimensions: Dump Height: | 82.6" |
| Dimensions: Dump Reach at Full Height : | 22.7" |
| Dimensions: Ground Clearance to Chassis: | 7.9" |
| Dimensions: Height to Hinge Pin - Fully Raised: | 109.6" |
| Dimensions: Overall Height to Top of ROPS: | 75.1" |
| Dimensions: Overall Length - Less Bucket: | 92.2" |
| Dimensions: Overall Length with Bucket : | 120.3" |
| Dimensions: Overall Operating Height - Fully Raised: | 143.9" |
| Dimensions: Overall Width - Less Bucket A : | 52.6" |
| Dimensions: Rollback Angle at Full Height: | 82° |
| Dimensions: Rollback at Ground: | 29° |
| Dimensions: Seat to Ground Height: | 33.3" |
| Dimensions: Wheelbase: | 37.6" |
| Dimensions: Standard Specification Tire Size: | 10.00 x 16.5 HD |
| Electrical System: Alternator: | 100-amp |
| Electrical System: Battery: | 12-volt |
| Engine: Displacement: | 133.6 cu.in. |
| Engine: Gross Power @ 2500 rpm: | 46.3 hp |
| Engine: Make: | Yanmar |
| Engine: Maximum Torque: | 107.8 ft.-lbs. @ 1820 |
| Engine: Model: | 4TNV88C-KMS Tier IV |
| Engine: Net Power @ 2500 rpm: | 44.5 hp |
| Hydraulic System: Auxiliary Hydraulics - Standard: | 17 gpm |
| Hydraulic System: High-Flow Auxiliary Hydraulics - Option : | N/A |
| Hydraulic System: Reservoir Capacity: | 10 gal. |
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
- Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
- Removable plate for easy cleanout of foot area inside ROPS/FOPS
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
- Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
- Three control options include T-Bar and Hand/Foot.
- Automatic glow plug heating system provides superior cold-weather starting.
- Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
- Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
- Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
- A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
- All-new swing-out cooler provides improved access to the engine bay area.
- Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
- 42% more visibility with new low-profile lift arm.
- After treatment meets all Tier IV requirements through proven technology.
- Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
- All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
