Specifications
Capacities/Weights: Fuel Tank: | 16.5 gal. |
Capacities/Weights: Operating Weight - Approximate: | 6,880 lbs. |
Capacities/Weights: Rated Operating Capacity: | 1,900 lbs. |
Capacities/Weights: Rated Operating Capacity with Optional Counterweight: | 2,110 lbs. |
Capacities/Weights: Travel Speed - Maximum: | 7.5 mph |
Capacities/Weights: Travel Speed with Two-Speed Option - Maximum: | 12.5 mph |
Dimensions: Bucket Width: | 66" |
Dimensions: Clearance Circle - Front with Bucket: | 79" |
Dimensions: Clearance Circle - Front without Bucket: | 44.5" |
Dimensions: Clearance Circle - Rear: | 58.5" |
Dimensions: Departure Angle: | 25° |
Dimensions: Dump Angle: | 42° |
Dimensions: Dump Height: | 91" |
Dimensions: Dump Reach - Fully Raised: | 22.5" |
Dimensions: Ground Clearance to Chassis: | 6.5" |
Dimensions: Height to Hinge Pin - Fully Raised: | 120.5" |
Dimensions: Overall Height to Top of ROPS: | 80" |
Dimensions: Overall Length with Bucket: | 127" with 66" Bucket |
Dimensions: Overall Length without Bucket: | 94" |
Dimensions: Overall Operating Height - Fully Raised: | 158" |
Dimensions: Overall Width: | 66.5"/64.5"A |
Dimensions: Rollback at Ground: | 26° |
Dimensions: Rollback at Specified Height: | 96° |
Dimensions: Seat to Ground Height: | 39" |
Dimensions: Wheelbase: | 42" |
Dimensions: Standard Specification Tire Size: | 10.00 x 16.5 HD |
Electrical System: Alternator: | 95-amp |
Electrical System: Battery: | 12-volt |
Engine: Displacement: | 202.6 cu.in. |
Engine: Gross Power @ 2500 rpm: | 69.3 hp |
Engine: Make: | Yanmar |
Engine: Maximum Torque: | 173 ft.-lbs @ 1625 |
Engine: Model: | 4TNV98C-NMS Tier IV/Stage 3B |
Engine: Net Power @ 2500 rpm: | 68.4 hp |
Hydraulic System: Auxiliary Hydraulics - Standard: | 18.5 gpm |
Hydraulic System: High-Flow Auxiliary Hydraulics - Option (L/min): | 31.5 gpm |
Hydraulic System: Reservoir Capacity (L): | 8 gal. |
- Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
- New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
- Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
- Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
- Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
- Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas.
- All high-rotation pins have grease points for ease of maintenance.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
- Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
- Auxiliary controls are located on the control grip in all control configurations for easy access.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
- Impressive breakout forces deliver optimal digging and lifting performance.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
- ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
- Gehl PowerView® low-profile boom design offers optimal side-to-side visibility.
- Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment.
- Between the tire design keeps the machine length short and compact.
- The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
- The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
- Large Level II ROPS/FOPS is standard equipment.
- Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
- Improved cycle times increase productivity on the jobsite.
- Features such as the remote oil drain and filter provide simple and easy maintenance access.
- Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
R Series Operator's Manual PDF, 17.19 MB
More information available