Specifications
| Capacities/Weights: Fuel Tank: | 18 gal. |
| Capacities/Weights: Operating Weight - Approximate: | 7,980 lbs. |
| Capacities/Weights: Rated Operating Capacity: | 2,200 lbs. |
| Capacities/Weights: Rated Operating Capacity with Optional Counterweight: | 2,370 lbs. |
| Capacities/Weights: Travel Speed - Maximum: | 8.0 mph |
| Capacities/Weights: Travel Speed with Two-Speed Option - Maximum: | 11.9 mph |
| Dimensions: Bucket Width: | 70" |
| Dimensions: Clearance Circle - Front with Bucket: | 87.5" |
| Dimensions: Clearance Circle - Front without Bucket: | 52" |
| Dimensions: Clearance Circle - Rear: | 60" |
| Dimensions: Departure Angle: | 25° |
| Dimensions: Dump Angle: | 40° |
| Dimensions: Dump Height: | 94" |
| Dimensions: Dump Reach - Fully Raised: | 27" |
| Dimensions: Ground Clearance to Chassis: | 8" |
| Dimensions: Height to Hinge Pin - Fully Raised: | 123" |
| Dimensions: Overall Height to Top of ROPS: | 81" |
| Dimensions: Overall Length with Bucket: | 136.5" with 70" Bucket |
| Dimensions: Overall Length without Bucket: | 105" |
| Dimensions: Overall Operating Height - Fully Raised: | 161" |
| Dimensions: Overall Width: | 69.5"/65.5"A |
| Dimensions: Rollback at Ground: | 28° |
| Dimensions: Rollback at Specified Height: | 95° |
| Dimensions: Seat to Ground Height: | 40" |
| Dimensions: Wheelbase: | 43" |
| Dimensions: Standard Specification Tire Size: | 12.00 x 16.5 HD |
| Electrical System: Alternator: | 95-amp |
| Electrical System: Battery: | 12-volt |
| Engine: Displacement: | 202.6 cu.in. |
| Engine: Gross Power @ 2500 rpm: | 72 hp |
| Engine: Make: | Yanmar |
| Engine: Maximum Torque @ rpm: | 217 ft.-lbs. @ 1625 |
| Engine: Model: | 4TNV98CT-NMS Tier IV/Stage 3B |
| Engine: Net Power @ 2500 rpm: | 70.7 hp |
| Hydraulic System: Auxiliary Hydraulics - Standard: | 23.5 gpm |
| Hydraulic System: High-Flow Auxiliary Hydraulics - Option : | 35 gpm |
| Hydraulic System: Reservoir Capacity : | 8 gal. |
- Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
- Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
- Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
- The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
- Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
- Optional pressurized sealed cab enclosure, with sound reduction material and rear-mounted air filter, provides a cleaner, quieter, climate controlled operating environment.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Impressive breakout forces deliver optimal digging and lifting performance.
- Over the tire design provides wider access.
- Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
- ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
- Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
- Auxiliary controls are located on the control grip in all control configurations for easy access.
- Improved cycle times increase productivity on the jobsite.
- Extra-large side screens, combined with the Gehl PowerView® low-profile lift arm design, provide a wide field-of-view to the side work areas.
- HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
- Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
- Features such as the remote oil drain and filter provide simple and easy maintenance access.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
- All high-rotation pins have grease points for ease of maintenance.
- New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
- Large Level II ROPS/FOPS is standard equipment.
- Gehl PowerView® low-profile boom design offers optimal side-to-side visibility.
R Series Parts Manual PDF, 34.83 MB
More information available
