• Rated Operating Capacity at 35% Tipping Load (kg): 2,100 lbs. (953)
  • Net Power (kW): 70.7 hp (52.7)
  • Lift Height (mm): 128″ (3251)
    • Dimensions: Clearance Radius - Rear with Standard Counterweight: 64.6"
    • Dimensions: Clearance Radius - Front With Bucket: 94.6"
    • Volume: Coolant Capacity: 3.8 gal.
    • Dimensions: Bucket Width: 73.9"
    • Hydraulics: Motor Type: Axial Piston with Planetary Gear Box Reduction
    • Hydraulics: Transmission Pump Type: Axial Piston
    • Dimensions: Reach - Fully Raised: 34.5"
    • Electronic System: Cold Cranking Amps at Temperature: 850 CCA @ 0°F
    • Volume: Hydraulic Reservior Tank: 13.8 gal.
    • Dimensions: Track Gauge: 51.7"
    • Track Drives: Track Type/Track Rollers/Roller Type: Rubber/5/Steel
    • Engine: Peak Torque @ rpm: 206 ft.-lbs. @ 1700
    • Dimensions: Track Shoe Width: 17.7"
    • Electronic System: Battery Volts: 12V
    • Engine: Gross Power @ rpm: 72 hp @ 2500
    • Dimensions: Overall Length with Bucket - Standard Counterweight: 148.1"
    • Dimensions: Dump Height - Fully Raised: 98"
    • Dimensions: Carry Position: 8.2"
    • Dimensions: Overall Height at ROPS: 83.1"
    • Hydraulics: Auxiliary Hydraulic Flow - Rated Speed: 21.8 gpm
    • Dimensions: Dump Angle at Specified Height: 75°
    • Engine: Alternator Voltage/Amperage: 14V/95A
    • Engine: Type: 4-Stroke Turbo
    • Dimensions: Maximum Rollback Angle at Carry Position: 31.6°
    • Track Drives: Ground Pressure: 4.7 psi
    • Dimensions: Dump Angle - Fully Raised: 39°
    • Forces: Bucket Breakout - Lift Cylinder: 6,481 lbs.
    • Forces: Ground Speed - Single Speed: 6.1 mph
    • Dimensions: Maximum Rollback Angle - Fully Raised: 102.5°
    • Dimensions: Ground Clearance: 13.2"
    • Dimensions: Grouser Height: 1"
    • Dimensions: Height to Hinge Pin - Fully Raised: 128"
    • Engine: Net Power @ rpm: 70.7 hp @ 2500
    • Dimensions: Digging Position - Below Ground: +0.6"
    • Capacity: Operating Weight: 9,890 lbs.
    • Dimensions: Specified Height: 67.7"
    • Forces: Bucket Breakout - Tilt Cylinder: 6,631 lbs.
    • Dimensions: Overall Length without Bucket - Standard Counterweight: 116.5"
    • Engine: Displacement/Cylinders: 203 cu.in./4
    • Dimensions: Overall Operating Height - Fully Raised: 168"
    • Dimensions: Maximum Rollback Angle at Ground: 30°
    • Dimensions: Angle of Approach: 90°
    • Dimensions: Crawler Base: 58.4"
    • Dimensions: Reach at Specified Height: 31.3"
    • Capacity: Tipping Load: 6,000 lbs.
    • Engine: Make/Model: Yanmar/4TNV98TCT-NMSL Tier IV
    • Dimensions: Angle of Departure with Standard Counterweight: 29.2°
    • Hydraulics: Hight-Flow Hydraulic Flow - Rated Speed: 35.9 gpm
    • Track Drives: Drawbar Pull/Tractive Effort: 11,489 lbs.
    • Capacity: Operating Capacity at 50% Tipping Load: 3,000 lbs.
    • Dimensions: Maximum Rollback at Specified Height : 66.8°
    • Dimensions: Overall Width - Less Bucket: 69.5"
    • Forces: Ground Speed - Two Speed: 8.9 mph
    • Capacity: Operating Capacity at 35% Tipping Load: 2,100 lbs.
    • Volume: Fuel Tank: 24 gal.
    • Engine: Oil Pump Capacity: 11 qts.
    • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
    • Optional electronic attachment control - 14-pin connector that allows operation of all attachments.
    • Standard, selectable 2-speed drive motors, horn and backup alarm.
    • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
    • Track rollers and idlers are sealed and require no maintenance.
    • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
    • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
    • Both systems are compatible with all universal-style track loader attachments.
    • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
    • Additional reach and increased dump height result in more efficient load placement and overall performance.
    • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
    • Multi-purpose LCD display provides easy readout during operation.
    • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
    • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
    • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
    • Low-profile design provides outstanding forward, rear and side visibility.
    • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
    • Level II FOPS is standard equipment.
    • Power track drive motors deliver superior pushing power.
    • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
    • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency while AntiStall technology keeps the power flowing.
    • Optional rear bumper/counterweight provides additional protection and towing capability.
    • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
    • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
    • Cab forward design enhances the view to the bucket.
    • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
    • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
    • Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW)
    • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
    • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
    • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
    • Automatic glow module engine intake heating system provides superior cold-weather starting.
    • Coded wiring takes the guesswork out of electrical system identification.
    • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
    • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
    • New cast-iron pump design delivers efficient flow at higher temperatures.
    • All-Tach® system manually engages and disengages with a single lever.
    • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
    • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
    • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include: Joystick Sensitivity Position Reaction Engine Response AntiStall Pump Swash Plate Position
    • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
    • Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.
    • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
    • Single button allows simple scrolling and selection of various display functions.