TAKEUCHI TL12V2 — COMPACT TRACK LOADER

The TL12V2 features a vertical lift loader arrangement and sets another benchmark for compact track loaders by delivering one of the most capable and innovative machines available to the market today. The cab has been enlarged and features a smooth low effort overhead door design for improved entry and egress. A quiet ride track design with flotation pads reduces vibration, noise levels, and improves ride quality.

FEATURES

ENGINE

• EPA Final Tier 4 Emission Compliant

• Turbocharged and Intercooled

• DOC+DPF+SCR Exhaust After Treatment

• High Pressure Common Rail Injection System

• Active Power Control Power Management System

• Selectable Work Modes – Power and ECO

• Dial Throttle Control

• Automatic Fuel Bleed System

• Extended Life Coolant

• High Capacity Radiator, Hydraulic Oil Cooler and Intercooler Mounted Side-by-Side on Swing Out Frame

• Duel Element Air Cleaner

ELECTRICAL

• 12 volt System with 80 amp Alternator

• Heavy Duty, Quick Access Battery

• LED Work Lights, Front and Rear

• Sealed Rocker Switches

• Back-up Alarm

• Horn

UNDERCARRIAGE AND FRAME

• 17.7″ Quiet Track Design with Wide Block Tread

• Long Track Frame

• Fully Welded Frame with Integrated Cross Members

• Rear Bumper Integrated into Frame

• Front and Rear Tie-Down and Lift Points

• Permanently Sealed Track Rollers with Metal Face Seals

• Double Reduction Planetary Drives

• 2 Speed Travel

OPERATOR’S STATION

• 5.7″ Color Multi-Informational Display with Rear Camera

• Pilot Operated Controls

• Deluxe High Back Adjustable Suspension Seat

• Rear Pivoting Seat Bar with Integrated Arm Rest

• ROPS/FOPS Structure

• Retractable 2″ Seat Belt

• 3 Point Seat Belt (optional)

• FOPS Level 2 Roof Guard (optional High Flow)

• Polycarbonate Front Door (optional High Flow)

• Pressurized Cab with Roll-up Door, A/C, Heat, Defrost, Front Wiper, and AM/FM/MP3 Radio with NOAA Weatherband (optional)

HYDRAULIC & WORKING EQUIPMENT

• Vertical Lift Loader Design

• Heavy Duty Low Cross Member

• Cushioned Boom Cylinders

• Boom Float with Detent

• Hydraulic Pilot Controls

• Proportional Auxiliary Controls with Detent

• Pressure Relieving Flat Faced Coupler Body

• Hydraulic Self Leveling (ON/OFF)

• Mechanical Quick Coupler

• Hydraulic Quick Coupler (standard on cab units)

• 14-Pin Connector with Push Button Control (optional)

• Primary Flow Auxiliary Hydraulics 23.2 gpm

• High Flow Auxiliary Hydraulics 40.4 gpm (optional)

• Secondary Auxiliary Circuit 23.2 gpm (optional)

• Ride Control (optional)

• Control Pattern Change Valve (ISO or H) (optional)

FOUR PILLARS OF TAKEUCHI EQUIPMENT

The Takeuchi design philosophy is centered on Four Pillars: Performance, Durability, Operator Comfort, and Serviceability. The engineering focus of Takeuchi is to build machine to the highest standards of quality and performance. Takeuchi strives to build equipment that incorporates solutions into each and every component and feature.

PERFORMANCE

The Takeuchi full product line up is rugged, dependable and productive. Takeuchi equipment provides exceptional value, demonstrates outstanding performance, and measured by their longevity in the field. flotation.

DURABILITY

Durability is a cornerstone to the success of our Takeuchi equipment. Takeuchi manufactures equipment that provides less downtime and high resale values. Attention to detail along with quality parts is why Takeuchi has a reputation for providing highly reliable products.

OPERATOR COMFORT

Takeuchi builds equipment with the operator in mind. Takeuchi believes that large roomy cabs with an intuitive layout with placement of monitors, switches and controls are essential in providing the highest quality of comfort while operating equipment.

SERVICEABILITY

Each Takeuchi is designed to simplify service access reducing downtime and saving you valuable time and money. Every Takeuchi comes standard with a 2 year / 2,000 hour full machine warranty providing additional value and peace of mind.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • Machine Dimensions - Transport Length: 13 ft 3.3 in (4,045 mm)
  • Operating Performance - Travel Speed - Low: 5.0 mph (8.1 km / hr)
  • Machine Dimensions - Overall Operating Height:
  • Machine Dimensions - Max. Mid-Height Reach: 4 ft 8.0 in (1,416 mm)
  • Hydraulic System - Auxiliary Flow - Secondary Circuit (optional): 23.2 gpm (88.0 Lpm)
  • Hydraulic System - Auxiliary Flow - Primary Circuit: 23.2 gpm (88.0 Lpm)
  • Operating Performance - Ground Pressure - 15.7 in. Track:
  • Fluid Capacities - Fuel Tank Capacity: 32.7 gal (123.9 L)
  • Machine Dimensions - Clearance Circle with Bucket: 8 ft 2.6 in (2,504 mm)
  • Fluid Capacities - Hydraulic System Capacity: 24.8 gal (94.0 L)
  • Machine Dimensions - Mid-Height Reach:
  • Machine Dimensions - Track Width: 17.7 in (450 mm)
  • Machine Dimensions - Clearance Circle Rear: 6 ft 1.0 in (1,848 mm)
  • Fluid Capacities - Fuel Consumption (65% of Full Load): 3.8 gal / hr (14.4 L / hr)
  • Operating Performance - ROC w/ Optional Counter Weight:
  • Machine Dimensions - Dump Reach Fully Raised: 3 ft .4 in (924 mm)
  • Engine - Engine Displacement: 230 cu in (3.8 L)
  • Operating Performance - Operating Weight - Canopy: 12,860 lbs (5,835 kg)
  • Machine Dimensions - Track Ground Contact Length: 5 ft 7.6 in (1,717 mm)
  • Operating Performance - Ground Pressure - Cab:
  • Operating Performance - NOTE: *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
  • Machine Dimensions - Dump Height Fully Raised: 8 ft 1.0 in (2,459 mm)
  • Machine Dimensions - Machine Length: 10 ft 6.0 in (3,203 mm)
  • Machine Dimensions - Max. Lift Height to Bucket Pin: 10 ft 10 in (3,299mm)
  • Machine Dimensions - Transport Height: 7 ft 9.7 in (2,381 mm)
  • Operating Performance - Tipping Load: 11,737 lbs (5,324 kg)
  • Engine - Horsepower @ 2,600 rpm:
  • Machine Dimensions - Departure Angle: 29°
  • Machine Dimensions - Rollback Angle: 32°
  • Operating Performance - Lift Arm Breakout Force: 7,109 lbs (3,225 kg)
  • Fluid Capacities - Hydraulic Reservoir Capacity: 13.2 gal (50.0 L)
  • Operating Performance - Rated Operating Capacity, SAE J818*:
  • Fluid Capacities - Diesel Exhaust Fluid (DEF): 4.8 gal (18.0 L)
  • Operating Performance - Rated Operating Capacity (ISO 14397-1) @ 35%*:
  • Engine - Maximum Torque @ 1,500 rpm: 284 ft-lb (385 Nm)
  • ropstype: Enclosed
  • Operating Performance - Bucket Breakout Force: 7,874 lbs (3,571 kg)
  • Operating Performance - Rated Operating Capacity @ 35%*: 4,107 lbs (1,863 kg)
  • Operating Performance - Ground Pressure - 12.6 in. Track:
  • Operating Performance - Operating Load at 50% of Tipping Load: 5,868 lbs (2,662 kg)
  • Engine - Make / Model: Kubota / V3800-TIF4B
  • Machine Dimensions - Ground Clearance: 12.2 in (310 mm)
  • Operating Performance - Travel Speed - High: 7.3 mph (11.6 km / hr)
  • Fluid Capacities - Engine Lubrication: 13.9 qt (13.2 L)
  • Operating Performance - Ground Pressure: 4.8 psi (33.0 kPa)
  • Hydraulic System - Hydraulic System Pressure: 3,481 psi (24.0 MPa)
  • Engine - Horsepower @ 2,700 rpm:
  • Operating Performance - Operating Weight - Cab: 13,190 lbs (5,985 kg)
  • Fluid Capacities - Cooling System: 19.0 qt (18.0 L)
  • Machine Dimensions - Clearance Circle without Bucket: 5 ft 3.4 in (1,610 mm)
  • Engine - Horsepower @ 2,400 rpm: 111.3 hp (83.0 kW)
  • Operating Performance - Ground Pressure - Canopy:
  • Machine Dimensions - Dump Angle: 46.8°
  • Hydraulic System - Auxiliary Flow - High Flow (optional): 40.4 gpm (153.0 Lpm)
  • Operating Performance - Traction Force: 14,006 lbs (6,353 kg)
  • Machine Dimensions - Overall Width without Bucket: 6 ft 5.2 in (1,960 mm)