Tadano Demag Mantis Cranes* AC 45 City Tadano Demag Mantis Cranes* ATF 400G-6 Tadano Demag Mantis Cranes* AC 250-5 Tadano Demag Mantis Cranes* ATF-200-5.1
Tadano Demag Mantis Cranes* AC 45 City
Tadano Demag Mantis Cranes* ATF 400G-6
Tadano Demag Mantis Cranes* AC 250-5
Tadano Demag Mantis Cranes* ATF-200-5.1
Tadano Demag Mantis Cranes*Tadano Demag Mantis Cranes*Tadano Demag Mantis Cranes*Tadano Demag Mantis Cranes*
AC 45 CityATF 400G-6AC 250-5ATF-200-5.1

Fits everywhere.

The Most Compact Crane in the 45-Tonne Capacity Class
With a length of 8.69 meters, a width of 2.55 meters, and a height of exactly 3.16 meters, the Demag AC 45 City has the most compact dimensions in its class. In addition, its carrier length of only 7.2 m makes it best in class in this category as well.


Small Dimensions – Outsize Performance!

The most compact crane in its class
Like all other Demag 5-axle cranes, the biggest one in this series is also the most compact of its capacity class: With a total length of 14.49 meters, 5-axle steering, independent rear axle steering, and dynamic launch control, it is highly maneuverable, making it perfect for work at tight work sites.

- 304,235 lbs - 110,231 lbs
3 / 3 - 5 / 5 -
Boom Length
- 49.2' - 197′ - 43.3' - 197′
Max Lifting Capacity
- 450 tons - -
Maximum Working Radius
- 282′ - 263′
Max Lifting Capacity
- - - 220 tons
Capacity Class
- - 300 USt / 250 t -
- 704″ - 592″
Number of Axles
- 6 - 5
- 12x8x12 - 10x8x10
- 157″ - 157″
Jib Length
- 257.5′ - 19’ - 118′
Max Main Boom Length
102.4 ft / 31.2 m - 229.7 ft / 70 m -
Max System Length
145 ft / 44.2 m - 356.6 ft / 108.7 m -
Capacity Class
50 USt / 45 t - - -
Max Lift Height
- 410′ - 326.5′
- 122″ - 122″
  • Together with the IC-1 Plus control system, the new Demag crane is able to work with asymmetric and infinite outrigger positioning, meaning that the AC 45 City can be perfectly adjusted for all space conditions and load requirements within crane’s lifting capacity.
  • The 3-axle unit does not weigh more than 34 tonnes even when outfitted with its full equipment, meaning that it remains significantly under the twelve-tonne axle load limit and accordingly can get to work without the need for any additional transport vehicles. And when using a reduced counterweight, the crane even falls below the ten-tonne limit.
  • With its short base boom of just 7.8 m and options like the boom head traverse for increased lifting heights, the AC 45 City crane is also able to work in buildings with a relatively low clearance while still keeping its boom at a steep angle, enabling it to lift heavy loads indoors.
  • Anti-fall protection on boom (optional feature)
  • New design lower cab
  • Asymmetrical outrigger set-up
  • Advanced AML-F superstructure crane control
  • Two-engine configuration
  • Drive/steer 12x8x12
  • 4 outrigger positions
  • Tire pressure monitor system
  • LED chassis lighting
  • Full luffing jib to 250 ft (76 meters) (optional feature)
  • Hydraulic Telescopic Luffing Jib (HTLJ) (optional feature)
  • Lift Adjuster
  • Power System (PS) (optional feature)
  • Flat front lower windscreen
  • ZF – TC – Tronic heavy duty transmission
  • Disc brakes with intarder
  • Outrigger load display in upper cab with control box (optional feature)
  • Multi-function display with full diagnostic system
  • Hoist camera (optional feature)
  • Thanks to its innovative IC-1 Plus control system, the Demag AC 250-5 can even handle lifts that are normally the exclusive job of larger cranes. The system is designed to calculate the crane’s lifting capacity for every position of the boom subject to the slewing angle of the superstructure, in real time. This means that the lifting capacity for a specific radius is no longer limited to the lowest value for a pre-calculated 360° lifting capacity, as used to be the case. Instead, the crane can always take full advantage of the maximum available lifting capacity. This advantage is particularly useful when it comes to lifts requiring an asymmetric outrigger setup.
  • The Demag AC 250-5 is designed to help keep your operating costs down. To this end, many of the Demag 5-axle cranes’ components are interchangeable – from hoist 2, through the main boom extensions and runner, all the way to the swing-away rooster sheaves and heavy-lift attachment. This makes work easier for your service technicians and lowers your inventory costs.
  • Its clever axle load distribution makes the Demag AC 220-5 truly roadworthy, as it remains under an axle load limit of 12 tonnes even with a payload of up to 550 kilograms. In other words: For many jobs, it requires less additional transport, thus reducing the costs associated with it. Moreover, the crane can be quickly set up on-site, as it already carries everything it needs to get working.
  • Boom removal (optional feature)
  • Disc brakes
  • HTLJ – hydraulically telescopic luffing jib – interchangeable with ATF220-5.1 (optional feature)
  • 10x8x10 drive
  • Flat front wind screen
  • 5 outrigger positions
  • Lift & release adjuster
  • Tilting inner upper cabin
  • Aircraft warning light & anemometer
  • Battery re-charge / jump cable working for both engines
  • Jib insert for total jib system length of 118 ft (optional feature)
  • Asymmetrical outriggers
  • Tier 5 engine – cleaner emissions – improved mileage
  • Self-rigging auxiliary hoist
  • 2 engines
  • Tire pressure monitor system
Related Links