CONTACT THE EXPERTS AT ALTA CONSTRUCTION FOR ALL YOUR EQUIPMENT NEEDS!

Cimline DuraPatcher P5 KM International KM T-2 KM International KM 8000S KM International KM 4000S
Cimline DuraPatcher P5
KM International KM T-2
KM International KM 8000S
KM International KM 4000S
Year
----
Make
CimlineKM InternationalKM InternationalKM International
Model
DuraPatcher P5KM T-2KM 8000SKM 4000S
Description

The DuraPatcher P5 Patching system provides the maximum worksite safety with in-cab, single operator operation. See the general guidelines below to match your Requirements:

Guidelines:

1. Your work area many times has tight turning radiuses or height clearance issues.

2. Work zone is high traffic area and worker safety is of the upmost importance.

3. Your budget allows for a dedicated vehicle.

The KM T-2 Asphalt Recycler is a TRUE asphalt recycler with a production rate of approximately 4 tons every hour. The ability to have access to hot mix asphalt (HMA) year round is a luxury many asphalt contractors or municipals do not have. With the KM T-2 you have the ability to have HMA at your fingertips anywhere and anytime, no matter the weather or plant schedule.

The KM 8000S is designed to be mounted on a flatbed truck or utility trailer.

The KM 4000S is designed to slide in the bed of any 1 ton or bigger pickup truck.

Hydraulics
- Reservoir - 30 Gallon - -
Construction
- - All welded steel: 16G Skin, 20G Top and 14 G Asphalt Compartment All welded steel: 16G Skin, 20G Top and 14 G Asphalt Compartment
Weight
- - 1,400 lbs. -
Weight - 820 Lbs.
- - - Capacity - 4,000 Lbs.
BTU Filling Door
- - - Single insulated lid, Single cantilever handle
Shoveling Port
- - Dual shovel ports with inside walls tapered towards shovel port Single shovel port with inside walls tapered towards shovel port
Capacity - 8,000 Lbs.
- - Heating Element - Propane: 60,000 BTU or Diesel: 105,000 BTU -
Loading\/Unloading
- Unloading - Unload directly into application area or into front end loader bucket - -
Heating Element
- - - Propane: 60,000 BTU or Diesel: 105,000
Dimensions (L x W x H)
- - 72” x 64” x 54” 72” x 54” x 44”
Asphalt Heating Drum
- Construction - 3/16” steel: 450 Brinell hardened - -
Heating System
- Fuel - No. 1 or 2 Diesel, B-5 bio-diesel, or kerosene - -
Trailer Specs
- Dimensions (l x W x H) - 23’10” x 8’ x 7’6” - -
Insulation
- - 2”-3” of high efficiency fiberglass insulation 2”-3” of high efficiency fiberglass insulation
Features
  • Time Saving: Skip the long lines and hassle at the asphalt plant by using the T-2 to produce HMA at your shop or on the job site
  • Versatility: Ability to add as much or as little asphalt cement as you want to completely customize you mix design
  • Cost Savings: Asphalt for $15-25 a ton compared to $60-75 at the plant or $110 + for cold patch
  • Efficiency: Produces a load of 2,600Lbs. every 15-20 minutes or Approx. 4 tons/hr.
  • Profitability: If you are an asphalt producer you now have the ability to keep key customers supplied with HMA year round
  • Reliability: Recycle millings into plant quality or better mix year round. NO DIRECT FLAME IMPINGEMENT ON MATERIAL
  • Green Process: No longer do you have to throw out old chunks or millings
  • Heat Retention: Triple wall constructed with high efficiency insulation
  • Temperature Control: Thermostatically controlled for higher fuel efficiency
  • Cost Savings: Maintain HMA for a period of 48 Hours or reclaim bulk stored virgin HMA
  • Diesel or Propane Fired (2 30Lb. Propane Cylinders included with Propane units)
  • Heat Retention: Triple wall constructed with high efficiency insulation
  • Temperature Control: Thermostatically controlled for higher fuel efficiency
  • Cost Savings: Maintain HMA for a period of 48 Hours or reclaim bulk stored virgin HMA
  • Diesel or Propane Fired (2 30Lb. Propane Cylinders included with Propane units)
Related Links