New C Series loader backhoes with Tier 4 Final certified engines deliver the power and torque needed so you can dig, load, trench or push faster, while reducing the impact on the environment.

  • Loader Dimensions - Lift capacity to full height, lbs (kg): 7,996 (3627)
  • Backhoe Dimensions - Max pin height, ft/in (mm): 18’ 8” (5698)
  • Dimensions - Ground Clearance, in (mm): 15.5” (394)
  • Backhoe Dimensions - Reach from swing post, ft/in (mm): 17’ 0” (5186)
  • Backhoe Dimensions - Loading Reach @ max height, ft/in (mm): 4’ 6” (1362)
  • Transmission - Max Fwd travel speed, mph (kph): 22.1 (35.5)
  • Backhoe Dimensions - Loading Height, ft/in (mm): 14’ 7” (4450)
  • Dimensions - Transport width, ft/in (mm): 7’ 6” (2300)
  • Engine - Horsepower, net hp (kW): 95 (71)
  • Dimensions - Stabilizer spread, operating, ft/in (mm): 10’ 7” (3226)
  • Transmission - Gear: 4F/4R
  • Weight - Base Unit: 17,560 lbs (7965 kg)
  • Loader Dimensions - Bucket breakout force, lbf (daN): 14,253 (6340)
  • Transmission - Max Fwd travel speed, mph (kph): 22.5 (36.2)
  • Dimensions - Transport height, ft/in (mm): 12’ 6” (3815)
  • Engine - Displacement, cu in (l): 207 (3.4)
  • Backhoe Dimensions - Loading Reach @ max height, ft/in (mm): 7’ 5” (2272)
  • Engine - Peak torque, lb-ft (N-m) @ RPM: 338 (458) @ 1400
  • Backhoe Dimensions - Max pin height, ft/in (mm): 14’ 10” (4513)
  • Transmission - Gear: 4F/3R
  • Hydraulic System - System relief pressure: 3,045 psi
  • Dimensions - Transport length, ft/in (mm): 23’ 0” (7030)
  • Engine - Horsepower, gross, hp (kW): 97 (72)
  • Dimensions - Height to top of cab, ft/in (mm): 9’ 5” (2870)
  • Backhoe Dimensions - Max dig depth, ft/in (mm): 18’ 5” (5623)
  • Backhoe Dimensions - Bucket digging force, lbs (kg): 12,969 (5883)
  • Backhoe Dimensions - Crowd digging force, lbs (kg): 5782 (2623)
  • Loader Dimensions -  : 1.1 cu yd Heavy-Duty General Purpose
  • Hydraulic System - Pump capacity gpm (lpm): 40 (151)
  • Backhoe Dimensions - Crowd digging force, lbs (kg): 8,588 (3895)
  • Engine - Make and model: FPT F5BFL413B*B003
  • Backhoe Dimensions - Loading Height, ft/in (mm): 12’ 1” (3673)
  • Backhoe Dimensions - Bucket capacity, cu ft (m³): 7.5 (.21)
  • Backhoe Dimensions - Bucket digging force, lbs (kg): 12,933 (5866)
  • Loader Dimensions - Height to hinge pin, ft/in (mm): 11’ 5” (3481)
  • Backhoe Dimensions - Max dig depth, ft/in (mm): 14’ 6” (4426)
  • Loader Dimensions - Reach @ 45 degree dump angle, ft/in (mm): 2’ 5” (725)
  • Backhoe Dimensions - Reach from swing post, ft/in (mm): 20’ 7” (6279)
  • Dimensions - Wheelbase, in (mm): 85.6” (2175)
  • Tool Carrier Model The B95C TC combines the powerful backhoe of the B95C with an advanced curved-boom loader with true mechanical self-leveling both up and down— perfect for working with pallet forks. The standard quick coupler makes switching from bucket to forks a breeze.
  • Long reach model for 22’4” reach Choose the B95C LR Long Reach model for extended reach and dig depth.
  • Lower emissions, less fuel New Holland C Series loader backhoes comply with the extremely strict Tier 4 Final regulations, dramatically cutting emissions levels. The SCR (Selective Catalytic Reduction) solution lets the engine run at peak performance for maximum power. It’s simple, too – just top off the DEF (Diesel Exhaust Fluid) when refueling.
  • A better view to the trench Ultra-narrow backhoe boom gives you enhanced visibility to the trench, and fully adjustable joystick controls give you ultimate convenience.
  • Industry-leading comfort and visibility The spacious six-post cab features floor-to-ceiling windows for outstanding visibility, built-in comfort features to reduce operator fatigue and available pilot controls for added convenience.
  • Superior backhoe design Using the curved boom design of big excavators, the backhoe gives you big digging performance. With in-line cylinders, effort is reduced, visibility is better and the general digging performance is enhanced. Dual swing cylinders provide smooth movement for faster positioning of the arm over the trench and increases the stability of the machine.