- Capacities/Weights: Travel Speed with Two-Speed Option - Maximum: 11.9 mph
- Dimensions: Rollback at Ground: 28°
- Capacities/Weights: Fuel Tank: 21.5 gal.
- Engine: Model: 4TNV98CT-NMS Tier IV/Stage 3B
- Capacities/Weights: Operating Weight - Approximate: 8200 lbs.
- Dimensions: Height to Hinge Pin - Fully Raised: 123"
- Dimensions: Bucket Width: 70"
- Dimensions: Departure Angle: 25°
- Dimensions: Wheelbase: 49.5"
- Dimensions: Ground Clearance to Chassis: 8"
- Dimensions: Clearance Circle - Front without Bucket: 56"
- Engine: Maximum Torque @ rpm: 217 ft.-lbs. @ 1625
- Dimensions: Overall Height to Top of ROPS: 81"
- Dimensions: Clearance Circle - Rear: 64"
- Capacities/Weights: Rated Operating Capacity with Optional Counterweight: 2780 lbs.
- Engine: Make: Yanmar
- Dimensions: Overall Length without Bucket: 111.5"
- Dimensions: Overall Length with Bucket: 143" with 70" Bucket
- Dimensions: Seat to Ground Height: 40"
- Hydraulic System: Auxiliary Hydraulics - Standard: 23.5 gpm
- Dimensions: Standard Specification Tire Size: 12.00 x 16.5 HD
- Electrical System: Battery: 12-volt
- Engine: Gross Power @ 2500 rpm: 72 hp
- Dimensions: Overall Operating Height - Fully Raised: 161"
- Capacities/Weights: Travel Speed - Maximum: 8.0 mph
- Capacities/Weights: Rated Operating Capacity: 2600 lbs.
- Hydraulic System: Reservoir Capacity : 8 gal.
- Dimensions: Dump Reach - Fully Raised: 27"
- Dimensions: Overall Width: 69.5"/65.5"A
- Dimensions: Clearance Circle - Front with Bucket: 90"
- Engine: Net Power @ 2500 rpm: 70.7 hp
- Electrical System: Alternator: 95-amp
- Dimensions: Dump Height: 94"
- Dimensions: Dump Angle: 40°
- Dimensions: Rollback at Specified Height: 95°
- Engine: Displacement: 202.6 cu.in.
- Hydraulic System: High-Flow Auxiliary Hydraulics - Option : 35 gpm
- Large Level II ROPS/FOPS is standard equipment.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
- Impressive breakout forces deliver optimal digging and lifting performance.
- Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
- Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
- ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
- Auxiliary controls are located on the control grip in all control configurations for easy access.
- Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
- Extra-large side screens, combined with the Gehl PowerView® low-profile lift arm design, provide a wide field-of-view to the side work areas.
- Optional pressurized sealed cab enclosure, with sound reduction material and rear-mounted air filter, provides a cleaner, quieter, climate controlled operating environment.
- The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
- Gehl PowerView® low-profile boom design offers optimal side-to-side visibility.
- Features such as the remote oil drain and filter provide simple and easy maintenance access.
- Over the tire design provides wider access.
- Improved cycle times increase productivity on the jobsite.
- New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
- Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
- Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
- Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
- HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
- All high-rotation pins have grease points for ease of maintenance.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
- The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.