- Dimensions: Seat to Ground Height: 40"
- Dimensions: Dump Angle: 42°
- Dimensions: Clearance Circle - Front with Bucket: 90"
- Dimensions: Ground Clearance to Chassis: 8.0"
- Dimensions: Dump Reach - Fully Raised: 32"
- Dimensions: Bucket Width: 70"
- Dimensions: Overall Operating Height - Fully Raised: 167.4"
- Dimensions: Overall Length with Bucket: 148"
- Dimensions: Overall Length without Bucket: 116.5"
- Dimensions: Clearance Circle - Front without Bucket: 56"
- Engine: Make: Yanmar
- Capacities/Weights: Travel Speed - Maximum: 7.4 mph
- Engine: Net Power @ rpm: 70.7 hp @ 2500
- Dimensions: Height to Hinge Pin - Fully Raised: 130.3"
- Dimensions: Clearance Circle - Rear: 65.5"
- Capacities/Weights: Rated Operating Capacity: 2,700 lbs.
- Dimensions: Dump Height: 100"
- Capacities/Weights: Fuel Tank: 24.5 gal.
- Engine: Displacement: 202.6 cu.in.
- Engine: Gross Power @ rpm: 72 hp @ 2500
- Engine: Maximum Torque: 217 ft.-lbs. @ 1625
- Dimensions: Rollback at Ground: 29°
- Dimensions: Departure Angle: 25°
- Hydraulic System: Auxiliary Hydraulics - Standard: 23.5 gpm
- Dimensions: Wheelbase: 49.5"
- Dimensions: Overall Height to Top of ROPS: 81"
- Capacities/Weights: Travel Speed with Two-Speed Option - Maximum: 11.9 mph
- Hydraulic System: Reservoir Capacity: 10.5 gal.
- Dimensions: Overall Width : 69.5"
- Capacities/Weights: Operating Weight - Approximate: 8,150 lbs.
- Hydraulic System: System Relief Pressure : 3,200 psi
- Dimensions: Standard Specification Tire Size: 12.00 - 16.5 HD
- Engine: Model: 4TNV98CT-NMS Tier IV
- Hydraulic System: High-Flow Auxiliary Hydraulics - Option: 35 gpm
- Dimensions: Rollback at Specified Height: 94°
- Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
- Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Featured cab safety restraint bar for lifting ROPS/FOPS.
- Standard auxiliary detent allows the operator to set attachment for continuous operation.
- Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
- Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
- Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
- The chassis aids in superior weight distribution, which further enhances stability.
- Coded wiring takes the guesswork out of electrical system identification.
- Low-profile lift arm design provides outstanding forward and side visibility.
- Level II FOPS is standard equipment.
- T-Bar and dual-hand controls now available.
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Infinitely adjustable proportional auxiliary hydraulics.
- Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material at faster transport speeds.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
- Engine has conventional water/ethylene glycol liquid-cooled design.
- Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment.
- Self-leveling lift action provides better control of lifting loads.
- Heavy-duty timing link design, upper-rear channel support and large diameter pivot pins provide extra strength and rigidity to the lift arm, and exceptional rear visibility.
- Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Gehl parts and service support.
- Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
- Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
- Self leveling lift action for better control of lifting loads.
- Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.
- Emissions certified Tier IV engines combine power and efficiency.
- Engine consumes less fuel, making a positive impact on the bottom line.
- Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.
- Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
- Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
- Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
- Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.