TAKEUCHI TL10V2 — COMPACT TRACK LOADER

The TL10V2 features a vertical lift loader arrangement and is Final Tier 4 emissions compliant. The cab is completely redesigned and enlarged and features a low-effort overhead door design for improved entry and egress. A quiet track design with wide block tread reduces vibration, noise levels, and improves ride quality.

FEATURES

ENGINE

• EPA Final Tier 4 Emission Compliant

• Turbocharged

• High Pressure Common Rail Injection System

• DOC+DPF Exhaust After Treatment

• Automatic Fuel Bleed System

• Active Power Control Power Management System

• Working Modes – Power and ECO

• Dual Element Air Filter

• Dial and Foot Throttle

• High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame

ELECTRICAL

• Sealed Rocker Switches

• 12 volt System with 60 amp Alternator

• LED: Two Front and Two Rear

• Engine Preheat

• Hour Meter

• Back-up Alarm

• Horn

UNDERCARRIAGE AND FRAME

• Double Planetary Reduction Drives

• Permanently Sealed Track Rollers with Metal Face Seals

• Fully Welded Frame with Integrated Cross Members

• 2 Speed Travel

• 15.7″ Rubber Track

• Grease Type Track Adjuster

• Front and Rear Tie-Down Points and Lift Points

• Rear Bumper Integrated into Frame

OPERATOR’S STATION

• 5.7″ Color Multi-Informational Display with Rear Camera

• Tilt-up Operator’s Station

• Deluxe High Back Suspension Seat

• Rear Pivoting Lap Bar with Arm Rest

• ROPS / FOPS Structure

• Retractable 2″ Seat Belt

• Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)

• Retractable 3″ Seat Belt (optional)

• 3 Point Retractable Seat Belt (optional)

• Polycarbonate Door and Top Guard (High Flow Only)

HYDRAULIC & WORKING EQUIPMENT

• Vertical Lift Design

• Pilot Hydraulic Controls

• Boom Float with Detent

• Cushioned Boom Cylinders

• Hydraulic Self Leveling

• Proportional Auxiliary Hydraulic Controls with Detent

• Pressure Relieving Flat Faced Coupler Body

• 14-Pin Connector with Push Button Control

• High Capacity Steel Hydraulic Tank

• Mechanical Quick Coupler

• Hydraulic Quick Coupler Cab – Standard Equipment

• Hydraulic Quick Coupler Canopy – optional

• Primary Flow Auxiliary Hydraulics 18.8 gpm

• High Flow Auxiliary Hydraulics 32.8 gpm (optional)

• Secondary Auxiliary Hydraulics 18.8 gpm (optional)

• Ride Control (optional)

• Pattern Change Valve (ISO or H) (optional)

FOUR PILLARS OF TAKEUCHI EQUIPMENT

The Takeuchi design philosophy is centered on Four Pillars: Performance, Durability, Operator Comfort, and Serviceability. The engineering focus of Takeuchi is to build machine to the highest standards of quality and performance. Takeuchi strives to build equipment that incorporates solutions into each and every component and feature.

PERFORMANCE

The Takeuchi full product line up is rugged, dependable and productive. Takeuchi equipment provides exceptional value, demonstrates outstanding performance, and measured by their longevity in the field. flotation.

DURABILITY

Durability is a cornerstone to the success of our Takeuchi equipment. Takeuchi manufactures equipment that provides less downtime and high resale values. Attention to detail along with quality parts is why Takeuchi has a reputation for providing highly reliable products.

OPERATOR COMFORT

Takeuchi builds equipment with the operator in mind. Takeuchi believes that large roomy cabs with an intuitive layout with placement of monitors, switches and controls are essential in providing the highest quality of comfort while operating equipment.

SERVICEABILITY

Each Takeuchi is designed to simplify service access reducing downtime and saving you valuable time and money. Every Takeuchi comes standard with a 2 year / 2,000 hour full machine warranty providing additional value and peace of mind.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • ropstype: Enclosed
  • Machine Dimensions - Max. Lift Height to Bucket Pin: 10 ft 4.8 in (3,169 mm)
  • Engine - Make / Model: Kubota / V3307CR-TE4B
  • Fluid Capacities - Fuel Tank Capacity: 21.5 gal (81.0 L)
  • Operating Performance - Traction Force: 9,730 lb (4,413 kg)
  • Machine Dimensions - Mid-Height Reach:
  • Machine Dimensions - Track Ground Contact Length: 4 ft 7.9 in (1,419 mm)
  • Machine Dimensions - Transport Height: 7 ft 5.4 in (2,270 mm)
  • Fluid Capacities - Diesel Exhaust Fluid (DEF):
  • Operating Performance - Operating Load at 50% of Tipping Load: 3,600 lb (1,633 kg)
  • Operating Performance - Rated Operating Capacity @ 35%*:
  • Hydraulic System - Auxiliary Flow - High Flow (optional): 32.8 gpm (124.0 Lpm)
  • Operating Performance - Ground Pressure - Cab: 5.1 psi (35.4 kPa)
  • Machine Dimensions - Departure Angle: 30°
  • Operating Performance - Operating Weight - Canopy: 9,950 lb (4,515 kg)
  • Machine Dimensions - Transport Length: 12 ft 1.0 in (3,680 mm)
  • Operating Performance - Travel Speed - Low: 4.8 mph (7.7 km/hr)
  • Machine Dimensions - Overall Operating Height:
  • Operating Performance - Travel Speed - High: 7.0 mph (11.3 km/hr)
  • Machine Dimensions - Overall Width without Bucket: 5 ft 8.5 in (1,740 mm)
  • Operating Performance - NOTE: *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
  • Machine Dimensions - Clearance Circle Rear: 5 ft 5.2 in (1,655 mm)
  • Hydraulic System - Hydraulic System Pressure: 3,481 psi (21.0 MPa)
  • Engine - Horsepower @ 2,600 rpm: 74.3 hp (55.4 kW)
  • Operating Performance - Tipping Load: 7,205 lb (3,268 kg)
  • Machine Dimensions - Machine Length: 9 ft 7.2 in (2,925 mm)
  • Machine Dimensions - Max. Mid-Height Reach:
  • Machine Dimensions - Dump Reach Fully Raised: 3 ft 1.4 in (950 mm)
  • Operating Performance - Rated Operating Capacity, SAE J818*:
  • Machine Dimensions - Dump Height Fully Raised: 7 ft 11.9 in (2,435 mm)
  • Operating Performance - Operating Weight - Cab: 10,270 lb (4,660 kg)
  • Machine Dimensions - Track Width: 15.7 in (400 mm)
  • Fluid Capacities - Hydraulic Reservoir Capacity: 9.5 gal (36.0 L)
  • Machine Dimensions - Clearance Circle without Bucket: 5 ft 0 in (1,535 mm)
  • Engine - Horsepower @ 2,700 rpm:
  • Fluid Capacities - Hydraulic System Capacity: 17.2 gal (65.0 L)
  • Operating Performance - Lift Arm Breakout Force: 5,400 lb (2,450 kg)
  • Engine - Horsepower @ 2,400 rpm:
  • Operating Performance - Bucket Breakout Force: 6,520 lb (2,957 kg)
  • Machine Dimensions - Clearance Circle with Bucket: 7 ft 8.5 in (2,350 mm)
  • Hydraulic System - Auxiliary Flow - Primary Circuit: 18.8 gpm (71.2 Lpm)
  • Fluid Capacities - Fuel Consumption (65% of Full Load): 2.7 gpm (10.3 L /hr)
  • Hydraulic System - Auxiliary Flow - Secondary Circuit (optional):
  • Operating Performance - ROC w/ Optional Counter Weight:
  • Operating Performance - Ground Pressure - 12.6 in. Track:
  • Fluid Capacities - Engine Lubrication: 11.8 qt (11.2 L)
  • Operating Performance - Rated Operating Capacity (ISO 14397-1) @ 35%*: 2,522 lb (1,144 kg)
  • Machine Dimensions - Dump Angle: 40°
  • Fluid Capacities - Cooling System: 15.9 qt (15.0 L)
  • Operating Performance - Ground Pressure - 15.7 in. Track:
  • Engine - Engine Displacement: 203 cu in (3.3 L)
  • Operating Performance - Ground Pressure:
  • Engine - Maximum Torque @ 1,500 rpm: 195 ft-lb (265.0 Nm)
  • Machine Dimensions - Ground Clearance: 12.6 in (320 mm)
  • Operating Performance - Ground Pressure - Canopy: 4.9 psi (34.3 kPa)
  • Machine Dimensions - Rollback Angle: 30°