TAKEUCHI TL12R2 — COMPACT TRACK LOADER

The TL12R2 features a radial lift loader arrangement and sets another benchmark for compact track loaders by delivering one of the most capable and innovative machines available to the market today. The cab has been completely redesigned and enlarged and now features a smooth low effort overhead door design for improved entry and egress. A quiet ride track design with flotation pads reduces vibration, noise levels, and improves ride quality.

FEATURES

ENGINE

• EPA Final Tier 4 Emission Compliant

• Turbocharged and Intercooled

• DOC+DPF+SCR Exhaust After Treatment

• Automatic Fuel Bleed System

• Active Power Control Power Management System

• Working Modes – Power and ECO

• Dual Element Air Filter

• High Capacity Radiator, Hydraulic Oil Cooler and Intercooler Mounted Side-by-Side on Swing Out Frame

ELECTRICAL

• Sealed Rocker Switches

• 12 volt System with 80 amp Alternator

• LED: Two Front and Two Rear

• Engine Preheat

• Hour Meter

• Back-up Alarm

• Horn

UNDERCARRIAGE AND FRAME

• Double Reduction Planetary Drives

• Permanently Sealed Track Rollers with Metal Face Seals

• Fully Welded Frame with Integrated Cross Members

• 2 Speed Travel

• 17.7″ Rubber Track

• Grease Type Track Adjuster

• Front and Rear Tie-Down Points and Lift Points

• Rear Bumper Integrated into Frame

OPERATOR’S STATION

• 5.7″ Color Multi-Informational Display with Rear Camera

• Tilt-up Operator’s Station

• Deluxe High Back Suspension Seat

• Rear Pivoting Lap Bar with Arm Rest

• ROPS / FOPS Structure

• Dial Throttle Control

• Retractable 2″ Seat Belt

• Foot Throttle

• Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)

• Retractable 3″ Seat Belt (optional)

• 3 Point Retractable Seat Belt (optional)

• Polycarbonate Door and Top Guard (High Flow Only)

HYDRAULIC & WORKING EQUIPMENT

• Hydraulic Pilot Controls

• Boom Float with Detent

• Cushioned Boom Cylinders

• Proportional Auxiliary Controls with Detent

• Hydraulic Self Leveling

• Pressure Relieving Flat Faced Coupler Body

• High Capacity Steel Hydraulic Tank

• 14-Pin Connector with Push Button Control

• Mechanical Quick Coupler

• Hydraulic Quick Coupler Cab – Standard Equipment

• Hydraulic Quick Coupler Canopy – Optional

• Primary Flow Auxiliary Hydraulics 23.2 gpm

• High Flow Auxiliary Hydraulics 40.4 gpm (optional)

• Secondary Auxiliary Circuit 23.2 gpm (optional with High Flow only)

• Ride Control (optional)

• Pattern Change Valve (ISO or H) (optional)

FOUR PILLARS OF TAKEUCHI EQUIPMENT

The Takeuchi design philosophy is centered on Four Pillars: Performance, Durability, Operator Comfort, and Serviceability. The engineering focus of Takeuchi is to build machine to the highest standards of quality and performance. Takeuchi strives to build equipment that incorporates solutions into each and every component and feature.

PERFORMANCE

• The Takeuchi full product line up is rugged, dependable and productive. Takeuchi equipment provides exceptional value, demonstrates outstanding performance, and measured by their longevity in the field. flotation.

DURABILITY

Durability is a cornerstone to the success of our Takeuchi equipment. Takeuchi manufactures equipment that provides less downtime and high resale values. Attention to detail along with quality parts is why Takeuchi has a reputation for providing highly reliable products.

OPERATOR COMFORT

Takeuchi builds equipment with the operator in mind. Takeuchi believes that large roomy cabs with an intuitive layout with placement of monitors, switches and controls are essential in providing the highest quality of comfort while operating equipment.

SERVICEABILITY

Each Takeuchi is designed to simplify service access reducing downtime and saving you valuable time and money. Every Takeuchi comes standard with a 2 year / 2,000 hour full machine warranty providing additional value and peace of mind.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • Operating Performance - Travel Speed - Low: 5.0 mph (8.1 km/hr)
  • Fluid Capacities - Fuel Tank Capacity: 31.6 gal (119.5 L)
  • Machine Dimensions - Max. Lift Height to Bucket Pin: 10 ft 6.0 in (3,200 mm)
  • Hydraulic System - Auxiliary Flow - Primary Circuit: 23.2 gpm (88.0 Lpm)
  • Operating Performance - Ground Pressure - 12.6 in. Track:
  • Operating Performance - Operating Weight - Cab: 12,590 lb (5,710 kg)
  • Fluid Capacities - Fuel Consumption (65% of Full Load): 3.8 gal/hr (14.4 L /hr)
  • Operating Performance - Rated Operating Capacity (ISO 14397-1) @ 35%*: 2,975 lb (1,349 kg)
  • Machine Dimensions - Departure Angle: 30°
  • Hydraulic System - Hydraulic System Pressure: 3,481 psi (24.0 MPa)
  • Operating Performance - Ground Pressure - Canopy: 4.58 psi (31.6 kPa)
  • Operating Performance - Bucket Breakout Force: 8,210 lb (3,722 kg)
  • Fluid Capacities - Diesel Exhaust Fluid (DEF):
  • Operating Performance - Tipping Load: 8,629 lb (3,915 kg)
  • Machine Dimensions - Dump Reach Fully Raised: 3 ft 1.8 in (960 mm)
  • Operating Performance - Ground Pressure - 15.7 in. Track:
  • Operating Performance - Ground Pressure - Cab: 4.68 psi (32.3 kPa)
  • Machine Dimensions - Clearance Circle Rear: 6 ft 0 in (1,829 mm)
  • Operating Performance - Rated Operating Capacity, SAE J818*:
  • Operating Performance - Ground Pressure:
  • Machine Dimensions - Rollback Angle: 30°
  • Machine Dimensions - Overall Width without Bucket: 6 ft 5.2 in (1,960 mm)
  • Machine Dimensions - Machine Length: 10 ft 6.2 in (3,205 mm)
  • Machine Dimensions - Transport Height: 7 ft 7.0 in (2,311 mm)
  • Engine - Make / Model: Kubota / V3800TIF4B-Turbo Intercooled
  • Machine Dimensions - Track Width: 17.7 in (450 mm)
  • Machine Dimensions - Dump Height Fully Raised: 7 ft 10.5 in (2,400 mm)
  • Machine Dimensions - Overall Operating Height:
  • Machine Dimensions - Dump Angle: 42°
  • Fluid Capacities - Hydraulic Reservoir Capacity: 13.2 gal (50.0 L)
  • Engine - Horsepower @ 2,600 rpm:
  • Machine Dimensions - Mid-Height Reach:
  • Operating Performance - Traction Force: 14,010 lb (6,353 kg)
  • Machine Dimensions - Ground Clearance: 12.5 in (320 mm)
  • Fluid Capacities - Engine Lubrication: 13.9 qt (13.2 L)
  • Operating Performance - Operating Weight - Canopy: 12,300 lb (5,580 kg)
  • Operating Performance - Travel Speed - High: 7.3 mph (11.8 km/hr)
  • Engine - Engine Displacement: 230 cu in (3.8 L)
  • Hydraulic System - Auxiliary Flow - High Flow (optional): 40.4 gpm (153.0 Lpm)
  • Operating Performance - Rated Operating Capacity @ 35%*:
  • Fluid Capacities - Hydraulic System Capacity: 22.5 gal (85.0 L)
  • ropstype: Enclosed
  • Operating Performance - ROC w/ Optional Counter Weight:
  • Machine Dimensions - Clearance Circle with Bucket: 8 ft 4.6 in (2,555 mm)
  • Machine Dimensions - Clearance Circle without Bucket: 5 ft 4.4 in (1,635 mm)
  • Engine - Horsepower @ 2,400 rpm: 111.3 hp (83.0 kW)
  • Hydraulic System - Auxiliary Flow - Secondary Circuit (optional): 23.2 gpm (88.0 Lpm)
  • Operating Performance - Operating Load at 50% of Tipping Load: 4,315 lb (1,957 kg)
  • Fluid Capacities - Cooling System: 19.0 qt (18.0 L)
  • Machine Dimensions - Max. Mid-Height Reach:
  • Operating Performance - Lift Arm Breakout Force: 8,075 lb (3,663 kg)
  • Engine - Maximum Torque @ 1,500 rpm: 276 ft-lb (374 Nm)
  • Machine Dimensions - Transport Length: 13 ft 3.3 in (4,045 mm)
  • Machine Dimensions - Track Ground Contact Length: 5 ft 7.5 in (1,716 mm)
  • Engine - Horsepower @ 2,700 rpm: