MAULDIN PRECISION SPRAY − ASPHALT DISTRIBUTORS

The Precision Spray is leading the way in asphalt distributor innovation and technology. Companies nationwide are seeking a machine that is simple and easy to run and maybe more importantly, simple and easy to maintain.

Mauldin Paving Products produces a full range of Asphalt Pavers, Oil Distributors, Tack Tanks, Motor Graders, and Rollers.

FEATURES

• Automatic, Heated Clean-Out System

• 400GPM Heated Asphalt Pump

• Heated Solvent Tank

• Dual, Thermostat-Controlled Diesel Burners

• Easily Accessible Manhole from Curbside Ladder

• 8-16′ Telescoping Spray bar (Extensions to 24′)

• Internal Poppet Spray Valves for Maximum Leak Protection

• 1000 – 3500 Gallon Tanks

• Available as Roll-On/Roll-Off or Slip-In Units

TELESCOPING SPRAYBAR

Standard 8-16ft telescoping bar is the preferred bar by many material specialists. Production and ease of operation are at the core of its qualities.

ASPHALT PUMP

High quality, high volume, heated 400 GPM asphalt pumps are found on every Precision Spray distributor. The pump center-line is located at the sump level of the tank for maximum performance.

DOUBLE FLUE DESIGN

CBC engineering has incorporated a standard double flue design technology. This design is located very low in the tank to permit minimum start-up times, even at low tank levels. Maximum tube heating area and standard diesel burners yield short heating cycles.

AUTOMATIC CLEAN-OUT CYCLE

Leading the way in design technology is the Precision Spray’s exclusive heated, automatic clean-out cycle. Never has clean-up been so easy and simple. Clean-out that is done 100% of the time, accurately and without question. Simply turn master control to “Clean-Out” and press “Start.”

MASTER AND CAB CONTROLS

Safety first. This can be illustrated in the fact that whenever the master control is active, the cab control is completely inactive. No accidents by cab operator while performing various operations at the master control. Redundant cab control wiring harness and easy computer programmability translates into uptime.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • Other - Standard Equipment: Single nozzle hand spray attachments with 25' hose, LED lights, redundant wire harness between master and cab controls, 8' spray curtain, diamond plate fenders
  • Tank Construction - Tank Shell: 10 gauge steel, oval in shape
  • Tank Construction - Contents Gauges: Front and rear, float type, 100 gallon increments
  • Tank Construction - Capacities: 1000, 2000, and 3500 gallon truck mounted or roll-on/roll-off
  • Spraybar - Breakaway: Center, mechanical breakaway system
  • Spraybar - Extensions (Optional): 1', 2', and 4' available, vertically folding
  • Spraybar - Cross Section: 12 cubic inch high volume
  • Tank Construction - Tank Construction: Meets all applicable Federal Cargo Tank Regulations 49 CFR 173.247
  • Spraybar - Spray Height Control: Electric/hydraulic with safety chains
  • Asphalt Pump - Stainer System: Single location, auto-cleaning, quick-change | All function protection
  • Tank Construction - Overflow: 3" internal
  • Heating System - Controls: Blowers and fuel on separate switches
  • Heating System - Exhaust Stacks: Two, Rear Mounted, Insulated | 14 gauge stainless construction
  • Spraybar - Spray Width Control: Electric/hydraulic with 4" control
  • Asphalt Pump - Type: Positive displacement rotary gear type
  • Flush/Cleanout System - Pre-Soak/Washdown: Air operated, 15' hose, atomizes solvent
  • Tank Construction - Manhole: 20" diameter with curbside ladder access and spill collar
  • Asphalt Pump - Heat: Fully heat jacket asphalt pump
  • Asphalt Pump - Flow: 400 GPM
  • Heating System - Safety: Continuous ignition with low level ignite protection
  • Tank Construction - Heads: 7 gauge steel, dished and flanged
  • Heating System - Burners: Two, diesel fired with 25 gallon tank
  • Flush/Cleanout System - Solvent Tank: 25+ gallon, heated
  • Asphalt Pump - Location: Pump centerline below bottom level of tank sump
  • Controls - Cab Controls: Spray on/off, application rate, spray width, spray distance, pump calibration, travel calibration, application rate presets
  • Tank Construction - Tank Skin: 0.050" aluminum jacket
  • Spraybar - Spray Valves: Air operated, internal poppet, no leak design on 4" centers
  • Flush/Cleanout System - Components Cleaned: Asphalt pump, strainer box, all plumbing, entire spraybar, all valves
  • Heating System - Flues: Two flue tubes with stainless steel liners
  • Controls - Master Controls: Located rear curbside, pump speed, pump direction, load, unload, transfer, tank circulate, hand spay, clean-out, burners onn/off, cab controls on/off
  • Heating System - Temperature Control: Automatic, thermostatically controlled | 4" dial and pencil thermometers
  • Tank Construction - Sampling Valve: Located on front head
  • Tank Construction - Tank Insulation: 2" mineral wool on front head and sides | 4" mineral wool on rear head
  • Spraybar - Type: 8' to 16' full circulating, telescopic, straight-line start & stop
  • Tank Construction - Surge Plate(s): 10 gauge steel, reinforced, staggered crawl holes
  • Flush/Cleanout System - Type: Fully automatic with push button start | Self contained, environmentally friendly
  • Other - Optional Equipment: Process heat, auxiliary power pack, wet box, tool box, metric gauges