The GT 1400 heater uses an internal combustion Micro Turbine with NO external or exposed flame. The burning of the fuel is designed to be contained entirely within the combustion walls.

The JetHeat heater module converts over 90% of the ULSD to usable heat. During operation the diesel fuel is vaporized. This means it is converted to a gas, rather than burned as a liquid, before it enters the combustion chamber. The result is continuously sustained combustion that is highly efficient and extremely clean. You won’t see black smoke come out of a JetHeat GT 1400 like you see on a conventional diesel unit. The output from the JetHeat heater produces clean, breathable air. 100% Intake Air Filtration helps keep air clean on dusty work sites.

The JetHeat heater is air cooled and has no liquid cooling system. Our diesel competitors have conventional liquid cooling systems. These systems allow a fair amount of the radiant heat generated to escape into the environment.

Our design has important benefits to the end user:

  • TIME: The fully heated output is extremely rapid. It is usually only 30-60 seconds from a cold start!

  • EFFICIENCY: Unlike our competitors, our outputs are 99% of our inputs.

  • GREEN: Extremely low carbon emissions. MInimal NOX or SO2 is created.

  • SERVICABILITY: Designed to be easy to operate, troubleshoot, and service.

The JetHeat GT 1400 utilizes a cutting edge High Bypass Turbofan and Stator System. The fan and stators are specifically designed by JetHeat, ultilizing advanced aerodynamics to achieve high efficiency. JetHeat leads the industry in flow rates and static pressure capabilities, resulting in product performance that our competitors cannot match.

Bottom line: Our heaters produce twice the heat using half of the fuel of competitive products. Better by Design.

  • Heat Output: 860,000 to 1.4 million BTUs equivalent
  • Fuel Consumption: 3.2 - 5.3 Gallons Per Hour
  • Weight: 275 lbs. (heater core only)
  • Air Flow: 3,200-5,200 CFM
  • Air Pressure: Up to .7 PSI (20" WC)
  • Fuel: Ultra Low Sulfur Diesel or ULS Kerosene
  • Air Temperature: 145° to 200° F Rise over inlet temperature
  • Thermal Efficiency: Over 90%
  • Air Quality: Less than 10 PPM CO & Odorless
  • Dimensions: 24" W x 47" L x 24" H (heater core only)
  • Optimal Output
  • Safety Features
  • Proprietary Catalyst Technology
  • Microprocessor Controlled