1710D Horizontal Grinder

Overview

Heavy duty and mobile, the 1710D Horizontal Grinder can readily reduce a wide range of materials.

The 1710D’s large feed opening, measures 54″ x 27″ (137 x 69 cm). When boosted by Peterson’s high-lift feed roll, the feed opening’s maximum lift of 41.5 inches (105 cm) can tackle the largest of feedstock, and allows excellent accessibility to the rotor for maintenance.

The 1710D Horizontal Grinder is equipped with a Caterpillar Tier IV C9.3B 455 hp (Stage V, 339 kW) engine, or an optional, export-only C9.3B Tier III, 415 hp (309 kW) engine. At 46,500 pounds (21,092 kg), it is one of the lightest of Peterson’s grinder series, and is easily transportable.

Peterson’s Adaptive Control System, featuring a fully adjustable feed system, is optimized for a wide range of materials. The 1710D control panel features a large display that provides the operator with complete engine and system parameters to simplify set up and efficiently operate the unit.

The 1710D also features Peterson’s patented Impact Release System, to protect the machine against ungrindable materials, a feature unique to Peterson horizontal grinders.

The 1710D Horizontal Grinder features a quick-change multiple grate system, making it easy to customize grate configurations. Grates are removed through an easy-access door on the side wall. With Peterson’s patented up-turn rotor, and heavy-duty bits, and robust anvil, the 1710D has an exceptional wear life and accurate product sizing.

  • Powertrain - Engine & Horsepower: Caterpillar C9.3B Tier IV 455 hp (EU Stage V, 339 kW) Caterpillar C9.3B Tier III, 415 hp (309 kW) export only
  • Dimensions - Hopper Height: 6' 4" (193 cm)
  • Grates - Grate Thickness: 3/4" (19 mm)
  • Rotor - Rotor Shaft Size: 4.33" (110 mm) @ bearing, 4.75" (120 mm) @ center
  • Powertrain - DEF Tank Capacity (Tier IV Only): 17 US gal (65 L)
  • Dimensions - Ground Clearance: 14" (36 cm)
  • Feed System - Land Clearing Mode: 54" x 41.5" (137 x 105 cm)
  • Discharge System - Compact Discharge Conveyor Height: 9' 7" (292 cm)
  • Dimensions - Operating Width: 9' 6" (288 cm)
  • Tracks - Travel Speed: 0.7/1.3 mph (1.1/2.1 kph)
  • Powertrain - Main Hydraulic Tank Capacity: 72 US gal (272 L)
  • Rotor - Number of Bits: 22 drum rotor, 18 pinned rotor
  • Grates - Total Grate Area: 15.6 ft² (1.5 m²)
  • Discharge System - Discharge Conveyor Width: 3' 6" (107 cm)
  • Dimensions - Travel Length: 33' 1" (1009 cm)
  • Grates - Number of Grate Sections: 3
  • Tracks - Ground Pressure: 11.5 lbs/in2 (0.81 kg/cm2)
  • Dimensions - Operating Height: 11' 5" (348 cm) (Compact Conveyor) 14' 1" (429 cm) (Folding Conveyor)
  • Rotor - Rotor Speed: 10,000 fpm (3050 mpm) @ 2200 rpm (engine)
  • Production (per hour) - Green Waste: 140 yd³/39 US tons (107 m³/35 metric tons)
  • Rotor - Bit Size (width x height): 2.5" x 4.5" (63 x 114 mm)
  • Feed System - Feed Chain: 4 sections, full hopper width
  • Rotor - Rotor Width: 55.5" (141 cm)
  • Feed System - Feed Conveyor Width: 4' 6" (137 cm)
  • Estimated Weight - Machine Weight: 46,500 lbs (21 092 kg)
  • Feed System - Hopper Capacity: 3.2 yd³ (2.5 m³)
  • Dimensions - Travel Height: 11' 5" (348 cm)
  • Rotor - Rotor Diameter: 26.5” (67 cm)
  • Powertrain - Fuel Tank Capacity: 146 US gal (553 L)
  • Powertrain - Clutch: PT Tech SCT 2500
  • Production (per hour) - Scrap Board: 185 yd³/30 US tons (141 m³/27 metric tons)
  • Optional Equipment - LED Work Lights:
  • Discharge System - Discharge Conveyor Speed: 500 or 600 fpm (152 or 183 mpm)
  • Dimensions - Travel Width: 8' 2" (250 cm)
  • Tracks - Track Type and Width: triple grouser, 15.75" (40 cm)
  • Dimensions - Front Angle of Approach: 11º
  • Dimensions - Rear Angle of Approach: 27º
  • Feed System - Compression Roll Diameter (tip to tip): 24" (61 cm)
  • Feed System - Feed Opening (width x height): 54" x 27" (137 x 69 cm)
  • Grates - Grate Coverage: 174º
  • Dimensions - Hopper Length: 10' 9" (328 cm)
  • Dimensions - Operating Length: 33' 1" (1008 cm) (Compact Conveyor) 41' 1" (1250 cm) (Folding Conveyor)
  • The Impact Release System Protects Your Investment Peterson’s patented Impact Release System’s air bags provides uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders.  
  • The Second Line of Defense: The Impact Cushion System Urethane cushions and shear pins help protect the mill from catastrophic damage in the event of a severe impact from contaminants in the feedstock.
  • 3-Stage Grinding Process Provides Faster Reduction Peterson’s powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers are looking for.
  • Use Peterson Bits and Grates for The Best Quality Product Peterson offers a wide variety of durable, long-lasting bits and grates to enable you to produce exactly the products your customers demand.