2700D Horizontal Grinder

Overview

The 2700D is designed for operations requiring high production and frequent moves between jobs. At 62,000 pounds (28 123 kg), it is amongst the lightest of our grinder series.

The 2700D is powerful with a Caterpillar Tier IV C15 580 hp (433 kW), C18 755 hp (563 kW), or an optional export-only C18 Tier II, 765 hp (570 kW) engine. Heavy duty and mobile, the 2700D can readily reduce a wide range of materials.

The 2700D’s large feed opening, measures 61″ x 32″ (153 x 81 cm), when boosted by Peterson’s high lift feed roll, the feed opening’s maximum lift of 44 inches (112 cm), can tackle the largest of feedstock.

Peterson’s Adaptive Feed Control System, featuring a fully adjustable feed system, is optimized for a wide range of materials. The 2700D control panel features a large display that provides the operator with complete engine and system parameters to simplify set up and efficiently operate the unit.

The 2700D features a quick-change multiple grate system, making it easy to customize grate configurations. Grates are removed through an easy-access door on the side wall. With Peterson’s patented up-turn rotor and proprietary bits, the 2700D has an exceptional wear life.

  • Optional Equipment - Crossbelt Magnet:
  • Grates - Total Grate Area: 21 ft² (1.95 m²)
  • Dimensions - Operating Width: 10' 3" (312 cm)
  • Weight - Tri-Axle Weight: 35,820 lbs (16248 kg)
  • Dimensions - Operating Height: 16' 3" (526 cm)
  • Grates - Number of Grate Sections: 4
  • Rotor - Bit Size (width x height): 2.75" x 5" (70 x 127 mm)
  • Powertrain - Main Hydraulic Tank Capacity: 90 US gal (340 L)
  • Dimensions - 5th Wheel Height: 3' 8" (112 cm)
  • Discharge System - Conveyor Speed: 500, 600, or 700 fpm (152, 183, or 213 mpm)
  • Feed System - Feed Opening (width x height): 60" x 32" (152 x 81 cm)
  • Feed System - Feed Chain: 4 sections, full hopper width
  • Dimensions - Travel Length: 43' 9" (1334 cm)
  • Suspension & Towing - Stabilizers: 2 hydraulic
  • Dimensions - Travel Height: 11' 7" (353 cm)
  • Dimensions - Travel Width: 8' 4" (254 cm)
  • C18 Production* - Greenwaste: 300 yd³ (229 m³) 87.5 tons (79tonnes)
  • Rotor - Rotor Shaft Size: 5" (130 mm) @ bearing, 5.75" (146 mm) @ center
  • Rotor - Rotor Diameter: 32” (81 cm)
  • Powertrain - Engine: Caterpillar C15 Tier IV, 580 hp (433 kW) C18 Tier IV, 755 hp (563 kW) C15 Tier III, 580 hp (433 kW) export only C18 Tier II, 765 hp (570 kW) export only
  • Rotor - Rotor Width: 60" (152 cm)
  • Dimensions - Hopper Height: 7' 9" (236 cm)
  • Grates - Grate Coverage: 180º
  • Dimensions - Front to 5th Wheel: 5' 3" (160 cm)
  • Feed System - Land Clearing Mode: 61" x 44" (152 x 112 cm)0
  • Rotor - Rotor Speed: 10,000 fpm (3050 mpm) @ 2100 rpm (engine)
  • Rotor - Number of Bits: 20 drum rotor, 18 pinned rotor, 30 ASG Rotor
  • Powertrain - Clutch: PT Tech HPTO
  • Feed System - Compression Roll Diameter (tip to tip): 28" (71 cm)
  • Suspension & Towing - Tires: 295/75R22.5 or 445/50R22.5
  • Dimensions - 5th Wheel to Center Axle: 30' 11" (942 cm)
  • C15 Production* - Green Waste: 264 yd³ (201 m³) 77 tons (70 tonnes)
  • C15 Production* - Scrap Board: 323 yd³ (247 m³) 55 tons (50 tonnes)
  • Dimensions - Axle Spacing: 5' 4" (163 cm)
  • Dimensions - Hopper Length: 15' 7" (475 cm)
  • Dimensions - Feed Conveyor Width: 4' 10" (147 cm)
  • Powertrain - Fuel Tank Capacity: 285 US gal (1079 L)
  • C18 Production* - Scrap Board: 368 yd³ (281 m³) 62.6 tons (57 tonnes)
  • Dimensions - Operating Length: 55' 1" (1679 cm)
  • Feed System - Hopper Capacity: 6.5 yd³ (5 m³)
  • Grates - Grate Thickness: 1" (25 mm)
  • Weight - Machine Weight: 62,000 lbs (28 123 kg)
  • Discharge System - Discharge Conveyor Height: 15' 2" (462 cm)
  • Discharge System - Discharge Conveyor Width: 48" (122 cm)
  • 3-Stage Grinding Process Provides Faster Reduction Peterson’s powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers are looking for.  
  • The Second Line of Defense: The Impact Cushion System Urethane cushions and shear pins help protect the mill from catastrophic damage in the event of a severe impact from contaminants in the feedstock.  
  • Use Peterson Bits and Grates for The Best Quality Product Peterson offers a wide variety of durable, long-lasting bits and grates to enable you to produce exactly the products your customers demand.  
  • The Impact Release System Protects Your Investment Peterson’s patented Impact Release System’s air bags provides uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders.