5050H Electric Whole Tree Chipper

Overview

The stationary, electric Peterson 5050H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation. Equipped with a large feed throat, the 5050H can accept up to a 23-inch (56 cm) diameter single tree or multiple smaller stems.

The 5050H can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need.

The standard three-pocket disc produces chips from ⅝ to 1 ¼ inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long.

Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved depending on chip size and wood characteristics.

Peterson’s heavy-duty 66-inch diameter, 4 ¾ inch thick (168 x 12 cm) chipper disc has replaceable ½ inch (13 mm) wear plates.

Traditional babbitt-type knives or Key Knife components are available.

The stationary 5050H can be configured from 600 to 1000 hp (447–745 kW) at the disc depending on the needs of your application. An additional 600 hp (447 kW) electric motor powers the needs of the hydraulic system.

Since 1981, Peterson has specialized in the developing of delivery and processing equipment that turns low-grade organic materials into high value products.

 

  • Dimensions - Ground Clearance: 13" (33 cm)
  • Delimber/Debarker Flail - Flail Rods: 6 per drum
  • Chipper - Knife System: Babbitt or Key Knife
  • Optional Equipment* - Additional Lower Flail with Optional Positions:
  • Weights - Total Weight*: 103,500 lbs (46 947 kg)
  • Powertrain - Electric Power: USA: 460 VAC, 60 Hz, 3-phase
  • Delimber/Debarker Flail - Drive Type: hydrostatistic
  • Powertrain - Hydraulic Motor*: Pump Duty, 1x 600 hp (447 kW)
  • Log Loader - Grapple: 360° rotation, 42" (107 cm)
  • Weights - Tri-Axle Weight: 59,960 lbs (27 197 kg)
  • Chipper - Discharge Spout: hydraulic swivel
  • Chipper - Chipper Disc: heavy duty, 66" (168 cm) diameter
  • Log Loader - Knuckle Boom: 2-section, 26' 10" (818 cm)
  • Log Loader - Lift Capacity: 11,851 lbs (5376 kg) at 15' (457 cm)
  • Feed System - Feed Rolls: Dual with Floating Top Rolls
  • Chipper - Knife Pockets: 3 or 4 pockets
  • Delimber/Debarker Flail - Flail Chains per Drum: 78 chains, 8 links each
  • Dimensions - Axle Spacing: 60" (152 cm)
  • Dimensions - Travel Height (not shown): 13' 6 (411 cm)
  • Dimensions - Operating Length: 54' 7" (1664 cm)
  • Dimensions - Operating Width: 15' 2" (462 cm)
  • Delimber/Debarker Flail - Flail Speed Range: 400 to 700 rpm
  • Weights - 5th Wheel Weight*: 45,000 lbs (20 412 kg)
  • Feed System - Feed Speed Range: 64 to 170 ft/min
  • Dimensions - 5th Wheel Height: 4' 2" (126 cm)
  • Dimensions - 5th Wheel to Center Axle: 41' 9" (1271 cm)
  • Dimensions - Frame Length: 50' 9" (1547 cm)
  • Dimensions - Front to 5th Wheel: 1' 8" (51 cm)
  • System Controls - Control Program: Siemens or Allen Bradley
  • Chipper - Chip Size: ½" to 1 ¼" (13 to 32 mm)
  • Powertrain - Disc Motors: Crusher Duty, 1x 600 hp (447 kW)
  • Delimber/Debarker Flail - Bark Pusher: 120" x 24" (305 x 61 cm)
  • Delimber/Debarker Flail - Flail Drums: single lower and dual floating upper
  • System Controls - Cab Console Controls: log loader, flail, chipper
  • Powertrain - Main Hydraulic Tank Capacity: 300 gal (1135 L)
  • Dimensions - Travel Width: 11' 9" (358 cm)
  • Feed System - Feed Opening: 53" w x 24" (133 x 61 cm)
  • Log Loader - Controls: two lever electronic joystick
  • Feed System - Lower Feed Rolls: 7 Powered
  • Delimber/Debarker Flail - Drum Diameter: 11" (27 cm)
  • Dimensions - Travel Length: 52' 9" (1608 cm)
  • System Controls - Operator's Cab: weatherized, air conditioned
  • Dimensions - Operating Height: 20' 10" (635 cm)
  • Feed System - Maximum Log Diameter: 23" (56 cm)
  • Easy-to-Service Chain Flails and Replaceable Wear Liners Upper and lower chain flails strip bark and limbs from the stems, replaceable UHMW wear liners protect the flail housing sidewalls.
  • A High Visibility, Weatherized Cab Meets OSHA Standards Ergonomic joystick controls provide precise control of the two-section knuckle-boom log loader. Top, end-loading, or high rotation long spouts are available.
  • Two Chipper Disc and Knife Systems Available Peterson Disc Chippers come with three or four pocket, 66” (167 cm) diameter chipper discs with traditional Babbitted knife systems, or Key Knife™ systems.
  • The IQAN Control System Features A Large Display The 5050H’s crusher-duty electric motors have a rugged cast-iron frame and feature dynamically balanced die-cast aluminum rotors for durability and long wear.  

5050H Electric Whole Tree Chipper