5700D Horizontal Grinder

Overview

The 5700D Horizontal Grinder is designed for high-volume producers with very demanding end-product specifications.

Powered by a Tier II or Tier IV Caterpillar C27 1050HP (772 kW) engine, or an optional Tier II or Tier IV 1125hp (839 kW) C32 engine, the 5700D provides the highest power to weight ratio of any Peterson grinder.

At 82,000 pounds (37195 kg), the 5700D is designed for operations requiring high production and frequent moves between jobs. With a feed opening of 60 x 40 inches (152 x 102 cm) combined with Peterson’s high lift feed roll, 5700D Horizontal Grinder can readily reduce a wide range of material including stumps.

Peterson’s three-stage grinding process with an up turning rotor and large grate area enables the 5700D to produce materials to exact specifications.

The 5700D Horizontal Grinder IQAN control panel features a large LCD display that provides the operator with the information needed to efficiently operate the unit. System pressure transducers and remote monitoring capability simplify set up and provide complete engine and system parameters. The 5700D can be operated by wireless remote from the comfort of your loader.

The quick-change multiple grate system makes it easy to customize grate configurations to produce a wide variety of finished materials. Grates are removed through an access door on the side wall.

 

  • Feed System - Feed Opening (width x height): 60" x 40" (152 x 102 cm)
  • Grates - Grate Coverage: 182°
  • Rotor - Bit Size (width x height): 3" x 6.5" (76 x 165 mm)
  • Dimensions - 5th Wheel Height: 3' 4" (101 cm)
  • Discharge System - Discharge Conveyor Width: 60" (152 cm)
  • Discharge System - Conveyor Speed: 500, 600, 700 ft/min (152, 183, 213 mpm)
  • Rotor - Rotor Diameter: 40" (102 cm)
  • Dimensions - Axle Spacing: 5' 0" (152 cm)
  • Dimensions - Operating Height: 17' 3" (526 cm)
  • Rotor - Rotor Speed: from 6000 to 12000 fpm (1829 to 3658 mpm)
  • Grates - Number of Grate Sections: 4
  • Dimensions - 5th Wheel Clearance Radius: 8' 0" (243 cm)
  • Powertrain - Clutch: PT Tech HPTO15FX
  • Grates - Total Grate Area: 28 ft² (29.9 m²)
  • Dimensions - Travel Length: 47' 10" (1547 cm)
  • Rotor - Number of Bits: 20 drum rotor, 18 pinned rotor
  • Dimensions - Travel Width: 10' 1" (307 cm)
  • Discharge System - Discharge Conveyor Height: 16' 6" (503 cm)
  • System Controls - Peterson+ Analytics:
  • Dimensions - Travel Height: 12' 8" (386 cm)
  • Suspension - Stabilizers: 2 hydraulic
  • Dimensions - Hopper Height: 7' 8" (234 cm)
  • Powertrain - Main Hydraulic Tank Capacity: 98 US gal (371 L)
  • Dimensions - Operating Width: 11' 11" (372 cm)
  • Production with C27 engine* - Scrap Board: 591 yd³/90 tons (452 m³/82 tonnes) per hour
  • Dimensions - Hopper Length: 17' 5" (532 cm)
  • Rotor - Rotor Width: 64" (161 cm)
  • Rotor - Rotor Shaft Size: 6.6" (168 mm) @ bearing, 7.5" (191 mm) @ center
  • Powertrain - Fuel Tank Capacity: 340 US gal (1287 L)
  • Dimensions - 5th Wheel to Center Axle: 34' 4" (1046 cm)
  • Production with C27 engine* - Green Waste: 501 yd³/138 tons (383 m³/125 tonnes) per hour
  • Grates - Grate Thickness: 1.25" (32 mm)
  • Feed System - Feed Chain: 4 sections, full hopper width
  • Feed System - Compression Roll diameter (tip to tip): 36" (91 cm)
  • Dimensions - Operating Length: 60' 5" (1842 cm)
  • Dimensions - Front to 5th Wheel: 5' 2" (157 cm)
  • Feed System - Hopper Capacity: 7 yd³ (5.4 m³)
  • Powertrain - Engine: Caterpillar C27 Tier IV, 1050 hp (772 kW) C32 Tier IV, 1125 hp (839 kW) Caterpillar C27 Tier II, 1050 hp (772 kW) export only
  • Weight - Machine Weight: 82,000 lbs (37 195 kg)
  • Suspension - Tires: 295/75R22.5
  • Feed System - Land Clearing Mode: 60" x 55" (152 x 140 cm)
  • Weight - Tri-Axle Weight: 54,000 lbs (24 494 kg)
  • 3-Stage Grinding Process Provides Faster Reduction Peterson’s powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers are looking for.
  • The Impact Release System Protects Your Investment Peterson’s patented Impact Release System’s air bags provides uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders.
  • Use Peterson Bits for The Best Quality Product Peterson offers a wide variety of durable, long-lasting bits to enable you to produce exactly the products your customers demand.
  • The Second Line of Defense: The Impact Cushion System Urethane cushions and shear pins help protect the mill from catastrophic damage in the event of a severe impact from contaminants in the feedstock.
  • Use Peterson Grates for The Best Quality Product Peterson offers a wide variety of durable, long-lasting grates to enable you to produce exactly the products your customers demand.