5710D Horizontal Grinder

Overview

The 5710D Horizontal Grinder is a tracked horizontal grinder designed for high-volume producers with very demanding end-product specifications. Powered by a Tier II or Tier IV Caterpillar C27 1050HP (772 kW) engine, the 5710D provides the highest power to weight ratio of any Peterson grinder. At 88,500 pounds (40,150 kg)*, the 5710D is designed for operations requiring high production and frequent moves between jobs. With a feed opening of 60 x 40 inches (152 x 102 cm) combined with Peterson’s high lift feed roll, 5710D Horizontal Grinder can readily reduce a wide range of material including stumps.

Peterson’s three-stage grinding process with an up turning rotor and large grate area enables the 5710D to produce materials to exact specifications.

The 5710D Horizontal Grinder IQAN control panel features a large LCD display that provides the operator with the information needed to efficiently operate the unit. System pressure transducers and remote monitoring capability simplify set up and provide complete engine and system parameters. The 5710D can be operated by wireless remote from the comfort of your loader.

The optional tow dolly makes highway transportation between jobs easy. The quick-change multiple grate system makes it easy to customize grate configurations to produce a wide variety of finished materials. Grates are removed through an access door on the side wall.

Since 1981, Peterson has specialized in the developing of delivery and processing equipment that turns low-grade organic materials into high value products.

*Machine weight may vary by optional equipment and configuration.

  • Dimensions - Travel Height: 12’ 2” (371 cm)
  • Basic Machine Weight - with Tow Dolly: 99,000 lbs (44906 kg)
  • Discharge System - Discharge Conveyor Width: 60” (152 cm)
  • Dimensions - Ground Clearance: 18” (457 cm)
  • Grates - Grate Thickness: 1.25” (3.18 cm)
  • Feed System - Hopper Length: 14’-2 1/2” (433 cm)
  • Dimensions - Hopper Height: 7’ 6” (228 cm)
  • Optional Equipment - Tow Dolly:
  • Dimensions - Track Length: 15’ 3” (463 cm)
  • Dimensions - Operating Height: 16’ 10” (513 cm)
  • Rotor - Bit Size (width x height): 3 X 6 1/2” (7.6 cm X 16.5 cm)
  • Basic Machine Weight - Machine Weight*: 95,000 lbs (43,091 kg)
  • Grates - Grate Coverage: 182 degrees
  • Dimensions - Operating Width: 11’ 5” (348 cm)
  • Feed System - Feed Opening (width x height): 60 x 40” (152 x 102 cm)
  • Dimensions - Hopper Width: 5’ (152 cm)
  • Rotor - Rotor Width: 63.5” (161 cm)
  • Rotor - Rotor Diameter: 40” (102 cm)
  • Rotor - Rotor Speed: 840 rpm @ 2100 engine rpm
  • Powertrain - Horsepower: C27 1050 hp (772 kW) (standard)
  • Tracks - Track Type: triple grouser, 23.5 in (60 cm) wide
  • Dimensions - Operating Length: 57’ 10” (18 m)
  • Production – C27 1050hp - Green Waste: 501 yd³ / 138 US tons (383 m³ / 125 metric tons) per hour
  • Tracks - Ground Pressure: 12.5 lbs/in² (8507 kg/M²)
  • Feed System - Hopper Capacity: 7.0 yd³ (5.39 m³)
  • Discharge System - Discharge Conveyor Speed: 500, 600, or 700 ft/min (152, 183, or 213 m/min)
  • Grates - Number of Grate Sections: 4
  • Powertrain - Main Hydraulic Tank Capacity: 98 gallons (371 L)
  • Dimensions - Travel Width: 9’ 11” (300 cm)
  • Rotor - Rotor Shaft Size: 7 3/8” (187 cm)
  • Powertrain - Engine: Caterpillar C27 or C32 Tier II or Tier IV
  • Production – C27 1050hp - Scrap Board: 591 yd³ / 90 US tons (452 m³ / 82 metric tons) per hour
  • Rotor - Number of Bits: 20 drum rotor, 18 pinned rotor
  • Grates - Total Grate Area: 4060 in² (26 193 cm² )
  • Dimensions - Hopper Length: 14’ 7” (445 cm)
  • Feed System - Compression Roll Diameter (tip to tip): 36” (91.4 cm)
  • Feed System - Feed Chain: 4 sections, full hopper width
  • Tracks - Travel Speed: 1.2/2.3 mph (1.9/3.7 kph)
  • Powertrain - Clutch: PT Tech HPTO15FX
  • Feed System - Land Clearing Mode: 60 x 55” (152 x 140 cm)
  • Powertrain - Fuel Tank Capacity: 340 gallons (1287 L)
  • Dimensions - Travel Length: 45' 11” (1400 cm)
  • Dimensions - Front to Track Length: 15’ 6” (472 cm)
  • Use Peterson Grates for The Best Quality Product Peterson offers a wide variety of durable, long-lasting grates to enable you to produce exactly the products your customers demand.
  • The 5710D optional pinned rotor. The 5710D can also come equipped with an optional pinned rotor for tougher or contaminated materials.
  • The 5710D standard drum rotor. The 5710D comes standard with a robust drum rotor.
  • 3-Stage Grinding Process Provides Faster Reduction Peterson’s powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers are looking for.
  • Heavy-Duty Feed Chains Features heavy duty feed chains to ensure a lasting product.
  • The Second Line of Defense: The Impact Cushion System Urethane cushions and shear pins help protect the mill from catastrophic damage in the event of a severe impact from contaminants in the feedstock.
  • The Impact Release System Protects Your Investment Peterson’s patented Impact Release System’s air bags provides uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders.
  • Use Peterson Bits for The Best Quality Product Peterson offers a wide variety of durable, long-lasting bits to enable you to produce exactly the products your customers demand.